Search results

Thanks all for the help. Got a bag of perlite on way home and am going to re pot. Also no i don't have holes in pots. But the pots do have holes in them with a saucer on bottom that i can remove to allow drainage. Gotta say that this is alot of fun. Only other issue i had was some nute burn from...

Ok here is the situation. First grow and i re potted my plants last week. When i re potted they were 19 days old and doing quite well. Since the re pot they have not grown at all . They look perfect no signs of stress. But i went ahead and bought one of those moisture meters and 1 week after re...

So what your saying is there is nothing wired to the motor? Do you have everything pictured?(ex : the switch, wires and so on). I would assume this is a 115v fan so it is pretty straight forward. White wire from house goes to n, black to the external switch at L. Now if you have nothing wired to...

Great stuff man. I actually was inspired and built myself a setup like yours. I made a couple changes and i'll see how they work. Main change was i used the same pencil holder filter but sank it flush in the top lid then built a airtight gasket around it and mounted my fan above it pulling air...

Yeah I'd go 6 inch and make sure you pulling the air through the carbon filter. Have filter in tent with 6 inch in line pulling air through the filter and pushing out the tent. That way you wont have any air leaking out only in.

If you make sure your fan is pulling air out of your tent you should be good as no air will leak out of any cracks or seams because as your fan pushes air out it will be pulling air in any cracks or seams. Get it? Is at that point you still stink then your either not moving enough air or you...

Kewl thanks alot. Is it ok ,better or not a good idea to use the scrog method with clones? Has anyone used them with this method? Also we are planning on trying to clone back and forth ( i take clones from him, then he does from me, and so on) can we do this with out any special procedures?

Ok guys hear goes a question. I have a buddy who is getting ready to turn his lights to flowering. He planted seeds with unknown sex. When is the best time to cut some clones? Now from each one of his seven plants and mark each accordingly and when we know sex keep the fems? or wait untill...

Well i just got done reading this and man im very impressed. I am a noob and have been trying to decide on a grow setup. Well i've just found it. I will be going to walmart tom after work. Great job and i will be watching closely. +rep for sure. By the way i was thinking about cutting a door...

Im still trying to decide on my grow room or cabinet design. I have all the light i should need. I have 4 x 26w 6500k 1 x 100w 5500k also have 2 x 20w t5 6500k and 2 x 28w t5 6500k tube lights. Then after i decide what to grow in i will get my flower lights.

Well with out looking at wire spec i can't say for sure but it very well could ramp up or down speeds of the 2 motor's independently. Yes it would only be able to help lower humidity by remove humid air. It wouldnt be able to raise it with out a actual humidifier.

Ok i got ahold of some kitchen cabs. Im going to do some brain storming and measuring and see what i can come up with. Thanks for the help all. I will post tomorrow or later today size and what i'm thinking with my lighting and see what kinda ideas everyone has. Thanks Again

Thank's that is a pretty sweet little tool

With out seeing a wiring schematic i would assume it would control humidity as well as temp with a fan. When humidity rises above setpoint the fan would come on to move air and help control the humidity. It may be able to control a dehumidifier depending on wiring, instead of a fan it could very...

Yeah that's a lot like what I'm thinking. As far as hps goes that's not a problem as all the bulbs i have now are in the 5000 to 6500k range anyway was planning on swapping them when needed for 2700 to 4000k range . As far as heat goes that's not a issue i can take care of that with out any...

It looks as though it will control the fan speed by both humidity and temp. Also you can hook it up to under 3kwof heat which would come on as temp drops below set point.

Oh and to answer your questions. You can put it up over what is there. It might still be needed depending on what you have. is it just a metal roof with no kind of insulation factor to it? most likely due to the heat in room and cold outside it will condensate no matter what you do short of...

sorry that was just the image try this http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100052556&N=10000003+90066+531843

You can buy insulation that would work great at home depot to solve your problem. Check the link http://www.homedepot.com/catalog/productImages/300/12/123f27f6-555c-4b0d-b0fc-00e099475000_300.jpg

Thanks a lot guys. I actually have 150w and 100 w metal halide bulbs also. (1 of each). Should i not use them and stick with cfl's or mix em and use one or both of the mh and add a couple more cfl's on top of what i have?