Search results

im not high... thats the problem lol. i need a bowl, my answers will get much shorter.

ok, so you have 25' of corrigated duct work on the exaust? did you check the specs of the fan to see what the max run is? corrigated duct work creates back pressure on the fan which decreases the CFM (which could help in this case) but if you fall below 100 cfm it wont work as optimal. As...

not sure, but if i am playing a game on my PC that is graphics heavy, the fan on the video cards screems. I assume this is because max voltage is being applied to it. If you decrease the voltage on a dc fan, the rpm's go down along with the noise.

amazon.com sells tons of stuff. just go to safeway and buy a gift card...

well, that fan is 170 cfm, which is just a tad high for the filter, but i dont see that really being a problem. the reason you feel so little air movement around the filter is the filter has a lot of surface area for the air to pull through wich "dilutes" the amount of pressure you would feel...

yes, you can feel some air. Please note on the specs for recirc mode you need the can fan 6HO, NOT the standard can fan. If you have the standard one, its set up to exuast. Most peeps i belive would run the exaust through there light hoods and out of the room, killing two birds with one stone...

no, there are los of ways to set them up. If you are in recirc mode, the fan and the filter are inside the grow room just circulating air in the room. This mode eliminates about 80% of the smell towards the last few weeks. The other method which depresurizes the room, is the fan and filter are...

here are the specs off of the can fan site: MAX CFM: Recirculating (Scrubbing): 400/1400 m³/h Exhaust: 200/700 m³/h @ 0.1 sec contact time Recommended Min Airflow: 100 cfm Prefilter: Yes Flange: 6 & 8" Dimensions: (with pre-filter) ·Outside Diameter: 305mm/12" ·Height: 330mm/13"...

here are the specs off of the can fan site: MAX CFM: Recirculating (Scrubbing): 400/1400 m³/h Exhaust: 200/700 m³/h @ 0.1 sec contact time Recommended Min Airflow: 100 cfm Prefilter: Yes Flange: 6 & 8" Dimensions: (with pre-filter) ·Outside Diameter: 305mm/12" ·Height: 330mm/13" ·Total Weight...

If the fan is in recirc mode, you can exceed the cfm rating on the can filter. If you are exausting air out of the room with the can filter, you will need to stay with in the parameters of the can filter specs. The carbon needs time to scrub the air before it leaves the room. I properly set up...

Thanks for the replies. I cant wait until i get the chiller next week. My last harvest was steller, right at 7oz/plant. This go round was almost a total failure, with a carbon copy plan from the last harvest. The only thing that is different this time from last is the root temps. Right now im...

sounds awesome! good luck on your grow!

well, how used is the carb filter? they have a life expectency, how old are the bulbs? they have a life expectancy, if you get the ph tester, be sure to calibrate it. Looks like a pretty even trade to me considering you can buy a new 400w set up for about $300. much cheaper used on craigs...

Well, its been a while since i have visited RIU. I need some help (again). I had a terrible harvest this last time, somewhere in the neighborhood of 10 oz, (vs 26 oz) off my last harvest. What i have changed is the way i am adding C02. I am using a generator, instead of bottled co2. Here are...

I thought i updated this thread, i guess not. :(. The strain is unknown, i got it from a clinic. The finished weight of that bud was 76 grams.

Check out page two for the link to the equipment description. They where grown in a areoponic setup. However, im sure the results are mostly genetic. Thanks for the compliment!

outside is crunchy, inside is wet. 127g. I bet it looses half its weight from this point. Maybe more.

beautiful shots, composition and subject! I love the second one.

different strains have different times, i usually harvest when the tricomes are getting cloudy (a coddigen 14x loupe is perfect for this). Once they show the first signs of clouding up i would put them on water for one more week and call it good. hth

I have two can fan 6ho cooling each set of two independently. You can hold your hand on the glass of the reflectors. My last harvest i had them about 10" off the canopy. The problem with that is that the sides of the plants did not get good light, which is why i am adding two more. Now that i am...