Search results

In his case the drip loop is above the brick plus a horizontal cable leading towards the brick. ⚡

Having that power brick inside the tent is alittle unnerving. I imagine water droplets forming on the outer edges of the leafs and falling on the power brick.

If you do take the clone, make a humidity dome, get a spray bottle and rooting powder or gel before taking the cutting. If you use rock wool cubes - Flush the wool multiple times with ph'ed water without nutes, gently squeeze the corners and give it a few flicks of your wrists while holding the...

About your one door entrance. You could get a sheet of plywood from your local hardware store (Big enough for the door) and cut it vertical or how ever you like to make a smaller door. Cut exhaust and/or intake holes in one piece Use duct tape or similar to hold it in place and seal it to the...

For mature plants I normally keep my 400-600 watt hid lights no closer than 500 mm (1.5 - 2 feet). Clones and seedlings should be fine at 3 feet (Maybe closer if shaded by larger plants). Although CFLs and/or low wattage fluorescent lighting can be a lot closer with no issues. 50 mm (1 - 2 Inches)

I should add that you should never skimp out on your timers. Always ensure your lighting controller designed for hid lighting. HID Lighting have high inductive loads at shut down, can weld the timers internal pins together and the lights won't shut off or turn back on. (As you have already...