Search results

Phlizon makes several models so I'm sure you can find one to fit your other space. The Phlizons do seem to lack UVA and far red enhancement, but they grow killer weed, and are relatively inexpensive.

If you can fit a 41-in x 42-in light over your space, I would go with this Phlizon...

https://www.aliexpress.us I do most of my LED parts ordering from Hotred, Kingbrite and OTDiode.

Yeah, that will work; you end up with ~42W/sqft so you're on target. 30 days of veg at half wattage should be fine, as long as your canopy is 70% full when you go to flowering schedule at full wattage.

@curious2garden caught what I missed: your LED wattage is low. I would add at LEAST 50 more watts of LED in each grow tent before considering CO2. You want close to 40W/sqft and you have 4 sqft in each tent.

Agree. OP could increase wattage by 75%.

If I understand correctly, you have 3 rooms: 1 for mothers, and 2 (60 x 60) for grows, each with a (true) 110W LED board. If you're already harvesting 150-200g from each room every 100 days, I'd say you're close to maxing out your yield without adding CO2 and more wattage. That said, I'd suggest...

I'm not sure that counts, they don't specify it as an "auto", I think it's just a fast photo. That aside, "take forever to finish" would seem to disqualify as an auto.

Amnesia Hashplant from Oregon Green Seed is the only strain I know of whose description sounds like an archetypal super-auto, although, they don't call it that.

Thanx. Makes sense. I'm currently running 400W of 4000'K strips, and from what I've read, I should add ~25W of 660 and 6W of 730. Also considering adding some 400nm to inhibit some to the stretch the far red will precipitate, but sure how much. I'm open to knowledgeable advice re: all of this...

I'd like to add some 660nm and 730nm diodes to my DIY 4000K strip light to give my plants a boost from the Emerson Effect, and it would be most convenient to put the diodes in series on the same driver, but the 660 diodes require 2.4-2.6V at 350ma, the 730 are 3.2-3.6V at 350ma. As long as the...

Panama and Diet Durban currently in the grow room. US #phlizon I'd luv to win me a full spectrum bar light.... drool ....

Agree with your assessment, and the others who'd go with the rooted clones. Revegging is so unpredictable it gives me hemroids, but just seems a pity to throw out a perfectly good root system. Oh, well. Cuttings have been on the rooting mat since I chopped 3 days ago, so time to get the hydro...

Nope. The mother plant is in veg.

As an experienced grower, this is probably the question I would start with as well, but the factors that precipitated the chop are not what I'm asking about, so putting them out there is only going to result in frustration. How 'bout I just rephrase the OP: If you had a choice between revegging...

I had 2 plants in hydro, 6 weeks into 12/12, and made the decision to chop them both due to a number of factors. I need to start again, either from cuttings taken from earlier clones of the same plants, or reveg the existing 2 plants. The idea of revegging to take advantage of fully developed...

Sweet! Thanx for the authoritative response. Much appreciated.

I'm considering adding 20W of 660nm and 6W of 730nm to my ~400W, 4000'K Bridgelux strip DIY on separate drivers for Emerson Effect during lights on, and 10 min of the far red after lights out for Flower Initiation. Questions for those in the know: 1) Is this even worthwhile? Can I expect a...

And the stretch continues for the Diet Durban (far side of photo). Mental note: 4 weeks of veg for any future Diet Durban grows. Geez this thing is getting gangly. This is the point in the past when a new sativa was getting out of control I'd put on a second scrog net, but the limited vertical...

Yup. I have a Reptisun UVA+B tube I'll stick in and run the last few weeks to harvest.