Growmau5

Growmau5

Well-Known Member
Joined
Last seen
Messages
922
Reaction score
5,214
Points
218

Profile posts Latest activity Postings About

  • Qjay420
    What's up man wanted to see how your A/C project was going. I had a intristing phone call today from Jerry king rep in California. He was mad cool said he talks to you and supra. But we talked shop for a while on the phone, good stuff.
    H
    Where can I find the DIY step-by-step for your (4) cxb3590 panels? What did they cost all in? How many watts they consume?

    I want to run 4 (8)cxb3590's fixtures (or 4 (4) cxb3590's) over each 4x8 table, with each cxb3590 running at approx.: 75w-85w. I'm looking to get as close to the ppfd output of (3) 1000w HPS (mogul) fixtures over the same 32 sq.ft area.
    Mazer
    just wanted to thank you for all you precious work on forums and vidz that changed my point of view on lighting. hope to see you and pick your brains in live sometimes.
    Peace
    Qjay420
    Hi man I've recently fell on your you tube channel and love it. You are what I've been looking for. I build all types of things for my girls but what Cree and the new drivers have done plug and play. Thank you and I am taking that ride with you so I can't wait.
    D
    Hey Growmau5

    I am trying to find witch pot is for hlg 185 1400B. and I understand that is has to bee 100k. please can you be more specific, maybe give me a link or something. I will appreciate so mutch.

    thanks Djuni

    I already order cxb 3070 cobs :)

    thanks again
    debtheburk
    Hello growmau5, I've been watching you educating the people on youtube and you have inspired me to upgrade my lighting. I flower in a 2x4x4 grow tent and after all i have learned i'm going to order the MAU5-V111 Grow Kit. In order to dim the cob's for this kit, do i buy the same 100k Potentiometer and 10k resistor? This will be a huge upgrade for myself, im currently running 3 Kessil 350 LED's.
    S
    Hey growmau5 I have 2 cxb3590 3500k leds but they are only pushing 86 watts together from the wall is that right I'm using mean well Hlg 185h-c1400b or should I get a better drive my grow area is 2*3 6 foot high grow tent
    M
    mypassion
    @49.7%
    (2) CXB3590 3500K CD 72V @ 1.05A (75.5W ea)
    (1) HLG-185H-C1400 (running at ~1050mA
    This is the setup?

    Copy from suprapl.
    T
    hello,
    I came across your youtube videos, and found them educational and trustworthy.
    I have a 2x2 feet area and I'm going with 4x3590's with Angelina 90 reflectors.

    my question is what would be the optimal spacing of the cob's from one another? my intuition led me to think each sq foot gets a centerd cob...?
    mind you its not a tall space and I will have to be at 12" max from the canopy. thanks a bunch
    • Like
    Reactions: mypassion
    M
    mypassion
    Put them at the same distance between them and at the same time same distance between 1cob and the edge of the tent, make a square with them in the middle of the tent and if height is a big issue me swap Angelina with the glass lenses. They have a wider spread.
    S
    Hey mau5, I have been thinking about your opensource COB project, and I'd like to get involved organizationally. Managing a project with the potential scope you're talking about is going to take a lot of work. Not active on this forum, so I can't start a conversation with you. PM if you're interested in some legit help.
    S
    Senseimillan
    I want to make a 3D model of the passive pin heatsink included in the cutter kit, someone with the dimensions can you respond please?
    S
    Senseimillan
    T
    Howsit Buddy,

    Can you help me pick a driver for a cxa2530 4000k led. This is the only chip accessible to me within my budget. Its for a PC case.
    RawDawg517
    Hey brother found you on YouTube and I've been cramming all these videos over the last couple days....now I'm over here joining up trying to learn more from you so I don't miss out. Quick question I have for you. Can these setups be powered by 220?
    RawDawg517
    RawDawg517
    Let me be more specific since this led talk deals with alot of numbers....220volts. I have a 60 amp 220 control box that I run all my lights off of.
    D
    Do you have a link for a potentiometer? It would run 8 3590's off of a 700b driver. This is for future reference. Just want to have a good plan for when the time comes. Thanks.
    MeGaKiLlErMaN
    Still new to this forum, slowly moving from asscity...but since I can PM yet... I'll be looking to be getting a 10ftx 5ft up and running in the near future.I'm looking for the best setup I can get running at 500mA to 700mA while having 1000PPFD though out. I'm willing to come up on the amperage a bit and make it a work in progress. But The PPFD is important a to me as I'll be adding CO2.
    jbird325
    Is there no PM options on this damn forum, lol?
    sunni
    sunni
    youre too new of a member to PM yet. you will have to become more active on the forum :)
    TheCatmansOutoftheBag
    Okay sorry about my last post I clearly didn't do the research.. it has since then been deleted. If you could do me a favour and look over my illustrator drawing to make sure my wiring is okay that would be a hugeeee help??? It's kind of a rip off of greengenes and your growlight but it's also my first time soooooooo i wanna go with what works. Thanks
    Growmau5
    @Wilter those sinks are borderline. I would look for something a bit bigger and more suited to passive. I.e. Wider fins or pins.
    S
    I'm considering buying the 4 and 8 part kit, but I'm more considered about mark from cutter wont answer the question about why suddenly the 8 part kit is 200 bucks more expensive than before. it is cheaper to buy 2x4 part kit than 1 time 8 part kit. would you be kind to go after this issue. it looks like a scam to me.
    thank you
    soymilk
  • Loading…
  • Loading…
  • Loading…
Top