Sim0n405

should have wart the soil fist befor put seed in but it should stop it growing give it time that somethink i had to lean about over warting thing and make sure you ph is right all the way thought your grow,6.5 run of 6.5.7, i allway do my seed with a wet J clothes for 3 days looking for the tea pot to pop out then put them in the soil with a litte bit of Mycorrhizal fungi rootgrow in there for the root to go to work,then i well be re potting them after 2 weeks in to biger pot with Mycorrhizal fungi rootgrow on the bottom of the roots were it well set,this well help my girl to feed on the nuts later on were my roots can not get to,i keep you post on what im getting up to

Hi sim iv add you like to see how you getting on,and as some said get you fans right you need them to keep them cool,im just work out me new grow room as iv got lots of Lowryder Purple Jems seeds form my last grow as it was to late i found a hermie in there and she trun all my 4 girls in to seeds but im happy as now iv should have autoflower feminized seeds,so now i need a litte room to grow them girls,so wat you set up and lights as i wont to do my PJ under clf as well,as cubord not as big a me grow tent,

Sorry for the long reply. I know you probably already have your answer but you should get a fan to suck out air. This will act as an exhaust to get all the hot air out of your grow area. You don't need to blow air in through the intake with a fan. Since you'll be blowing air out the exhaust, cool air will automatically get sucked in though your intake hole. This is called a passive intake. Good luck!

Hello, your grow tent will have holes in it that are specifically made so you can hook up an intake or exhaust fan. The intake fan hole will likely be towards the bottom of the tent while the exhaust fan hole will be towards the top. If you're just installing one fan, I would hook up an exhaust fan to vent out all the hot air. If your lights have some sort of exhaust setup, you can hook that up straight to the exhaust hole with a fan. I found this forum post which has a lot of discussion about this same subject along with a diagram: http://www.thcfarmer.com/forums/f8/ventilation-4x4x6-5-grow-tent-618/