Recent content by Okieslayer405

33.33

The room is 9x11 but actual grow would be in the 4x8 range.

Yeah I’m not planning on framing it in, mount a few eye bolts and call it good. I’m leaning towards the 320’s for 10 strips but if they could take the 480’s i wouldn’t be opposed to going that way either.

So I have 40 of these cheap strips as well. I also have (4) 24”x44” sheets of aluminum plate that is 1/8” thickness. I’m going to mount 10 strips per sheet. I plan to mount a driver on each sheet to run the 10 strips. I need advice on which drivers to buy. Im looking at the HGL-320H-48B or the...

Sounds like I need to toss those 40 strips and just stick with my 600 hps’s. Thanks for all of the inputs. (I’m going back to my corner now, lol) ✌️

Yes, I had typo in the title. They are the 301a’s that arrow had for $5 in the image I posted. (I have 36 @ 2’) I appreciate all of the comments but nobody has suggested which drivers/strip numbers to use, mounted on angle aluminum as the frame, to cover 4x8, start to finish. If this won’t work...

I have looked, read and learned a lot here, but now I’m ready to jump in and try a LED build of my own. I’m still a bit confused so here is what I’m thinking. Goal is to cover a 4x8 area with the Samsung strips listed in the title from arrow (Cheaper, not top of the line, But $5 bucks & looked...

I am also considering getting my feet wet with the cheap arrow strips. My plan; 36 strips with 3 hgl320h48’s (12 strips w/driver; wired parallel) over a 4x8 table. Thoughts were no heat sink since strips were ran kind of soft. Should put me around 30 Watts per sq ft. Veg to flower, start to...