Recent content by NothinYet

Great updates! Glad to hear you are feeling better gg. Good vibes your way and sorry for your loss phil. You will be in my thoughts.

Man these buds sure are packing on some frost. These babies are smelling great.

I get that complete max is open. Let me rephrase the questions lol. The hlg-150h-20 says the specs are 4.5-7.5a. The test report shows 3.08-10.79. If I was to get the same exact driver they tested if it was a b version. Which situation would give me the extra 3.29a? 1. Dim wires open? 2...

I got it now. Except for the chart you posted. Is it saying 90k gives you 1.274a, 100k gives you 1.395a. so would 108ohms give you the rest up to 1.452a, or is the 1.452a only possible with the open circuit? Sorry for the questions if they sound stupid. I help people out a lot on...

A 100kohm pot turned up to 100% is like having the wires open? Or is this chart saying at 100kohms fully turned up you get 100%, and the driver needs to be fully open? Sorry for noob questions. The CV charts doesn't have the open percentage for the b type drivers. Does this mean they don't go...

So they don't?

I've been wandering if the type b drivers go above the max rating. We know the a drivers do. If so, is this located on the data sheet? Is it the same overage as the a drivers? If they do do they go over max. How is this achieved? With 100kohm pot turned to max? Or with 110kohm pot turned to...

Here are my three. Soil wasn't hot enough. We had some torrential rain for a few weeks, which flooded my holes. This combo stunted my growth some, but they are chugging along. Adding the espoma flower tone for a top dress every two weeks, and watering with unsulphered blackstrap molasses when...

Another update. Strong winds knocked over my amnesia and the other 2 .Were leaning pretty good. It didn't phase them though. The solo cups are for size reference. Dinafem is starting to form some good buds and get pretty frosty. The yield will probably be small, but it looks like really good...

You should disconnect 1 strip from the second build to get a more accurate comparison. The strips will always run cooler at lower current.

I got a test light from atreum. One of the 288 boards. Driver will be here on Friday. Will run some tests then.

Some people veg+flower with 4000k also with great results. I think the ones I seen were with 90 cri though.

If you have to. Go to the store and get a few screw in 2700k leds to help suppliment light with flowering. You can buy a light socket with a cord. Buy a couple or a few. Whatever you can afford. Place them around your tent. If you get 4 14-16w ones (100w equivalent) that gets you an extra 40-60...

Grand master level pulled 1.47gpw on his last run, or something close to that. He used all 550's with the 288v1 boards. I've seen a few grows pull close to 2 gpw. Leds are just like anything else. You have to learn your light. Most plants prefer temps around low 80's with led lighting from what...

Never heard of those. What type of driver do they use, and how hard are they driven is the question?