OMFG i had a faulty ZVNL120A...
I made it work using the diagram bellow.
Heres my esphome (esp32) config in Home Assistant:
output:
#Exhaust Fan
- platform: ledc
pin: GPIO27 #Connects to the FAN PWM OUT in the diagram
id: exhaust_fan_pwm
inverted: true
frequency: 1000...
Sorry i took time to reply i've been busy lately, and set aside this part of my project (growing culinary mushroom) has i've worked on other aspect of the project, but now im back on this part. I realize i have the S6 (NON lite) version sadly. Is there any solution out there for those models ...
@HVACker So instead of pulling the pin HIGH, I hooked up a 3.3v source (using a buck down converter) and connecting the board through the 3.v3 does make the LED light up on both of my MOSFET boards. I've also tried GPIO17 and GPIO16 (on 2 different ESP32)
So if I had to guess it would be the...
@HVACker
Here's the yaml code for esphome. The entity is picked up by HA as it should, i'm able to add the entity to my dashboard and view the slider with the On/Off toggle. I'll try your recommendations tomorrow night as i'm away from my home. As for the connections i'll double check...
So I've tried your method instead but it still doesn't work. Here's a diagram of how the esp32 is connected. The led of the MOSFET does not light up, so it could be a defect. Also the esp32 is plugged via usb so yes it gets power. Can't see how I would wire this all wrong. Am I missing...
Hello, this is my first post. I'm havin trouble acheiving what @zeon has documented. Did the same wiring and triple checked it, The mosfet PCB LED does not turn on on both pcb i've bought thwe fan turns on full speed. I can see the integration in HA and play with the card, but nothing happen the...