So im growing in soil under a 400w mh its about 3 ft and im using dutchmaster gold a and b. The bottom of the plant and middle are suffering from leaves turning yellow and dying very quickly(such as i have a handful of dead leaves a day). What is wrong? 1300 ppm 6.5-7.0 soil 78.8 degrees no...
I was wondering about adding nutes when you top off water. Should you add new nutes everytime you top off water or just so often and if so how often because i hear its good to just top off water so the plant takes the nutes that it didnt take before?
the first pic is hydro so it cant be overwatering and the second one is soil and its not overwatering and the lamp is air cooled with fans cooling it so i doubt its that either but thanks.
so im running a mh 400w and i have a 2 foot tall hash plat and some leaves are curling down and prowning on the tips and edges(with a side of drying out). Some leaves are also yellowing and drying and dying. Im watering at about 900ppm temp in room is 72-75 humidity is 40-60 %. Here is a pic of...
So first my set up is a 400w mh and im using dutchmaster gold, epsom salt, and calamag. The ppm is 850 and the ph is 6.2. The temperature is 72-75 degrees with a humidity of 40-60 %. These all seem fine but i do not know the strain and im having this appear on multiple leaves and on these leaves...
So first my set up is a 400w mh and im using dutchmaster gold, epsom salt, and calamag. The ppm is 850 and the ph is 6.2. The temperature is 72-75 degrees with a humidity of 40-60 %. These all seem fine but i do not know the strain and im having this appear on multiple leaves and on these leaves...
So im running a dwc unit with a 400mh light and a few leaves are curling on the plant. This is the only visable problem accept for old calcium def. The ph is fine and so is the ppm. Any advice?
:peace:
They're indoors. As for the solid flush, how would i go about doing this? And how heavy of a feeding?
Also i was thinking it was spider mites but i didnt find any of these signs. I removed the infected leaves hoping it was just a small bunch but is there any home made remover spray that you...
There is parts of my leaves missing( chunks out of the side, and holes). As for the big one the ph is 7-7.5 and im giving it about 750 ppm of dutchmaster gold a&b and calamag every other watering and i water every 2-3 days.
I might have bugs but cant see them on a dwc unit im running. The temp gets down to 63 ish degrees at night. Is that enough to kill them off? And i also have a plant in soil with leaves that are yellowing and browning in between the veins of the leaves; what might that be also?