nevergoodenuf

Just me...Rich--talked to you Earlier

Would you be so kind as to give me some help with the issue I have. Thanks I just finished framing 9 cxm-22s in a diy. I tied them all together in parallel. Pulled the hlg-600h-54b led driver out its box for the 1st time and see that it has 2 output power sources. Will the driver supply the 11.2Amps it is rated for if I wire all 9 cxm-22s to only 1 of the output power sources.

Hi man..
Could use your advice..
I want to buy new cobs(have some CXA3070 i still didn't used). And saw some of your post, saw you recommended the "CLU058 3000k 90cri gen 6 "
I dont have the budget to fill my room with Cob's so i will buy like 5 or 8 and order again next month.
So could you recommend a driver for the CLU058 3000k 90cri gen 6 ?
And i should be able to run 3000k and 3500K on the same driver?

Hey man you don't mind if I pick your brain do you I currently have a 2x2x5 tent using cfls and I'm wanting to make the switch to cobs originally I was thinking 4 cxb3590 but I just found out about the citizen cobs and was really wanting to do two cobs at about 100w ea maybe more do you have a setup you could suggest?

Hey man, I just finished my setup for DIY COB! Thanks for not letting me buy Blurple lights :D Can you give me your opinion on what I plan on setting up: http://www.rollitup.org/t/first-time-grower-final-diy-cob-tent-setup-need-approval.925159/

I really appreciate the time you gave me. I'm really interested in the flip chips and was wondering the best way to purchase some for testing. I'm not a grower but I'm using cobs for movie/TV lights. Have had good success with the 3590s but am excited about these newer chops. Thank you so much

Thank you so much for getting back to me about those cobs

Could you please tell me what cobs those are in your picture? Really appreciate it