Club 600
- Thread starter DST
- Start date
las fingerez
Well-Known Member
glad 2 see u back bro
a few of the 6'ers and myself have been helping 4tatude along while u been gone and he's smashing it bro, come take a look when u got a min 
DoobieBrother
Well-Known Member
Looks like DoobieBrother isn't the only one who was busy today! 
Have been zipping in & out all day while taking the odd Union Break: beautiful plants out there in 600-land! Wow!
Have been busy with a project that I just finished up.
Made an accessory for my bass today so I can embarrass myself with youtube vids of me covering various songs on my bass in a more interesting manner than the old "camera-on-a-tripod" view:
Will give it a full test later today.
I've already clamped it onto the head stock to check it out and the view goes all the way from the beginning of the fretboard (the "Nut") all the way the the to the bottom of the bass (hmm... the base of the bass, as it where) and used the A/V Out on the camera to view it through a television and it looks pretty cool.
I also made it reversible so I can get a similar view but from the base of the guitar body all the way up to the tip of the headstock.
Have been zipping in & out all day while taking the odd Union Break: beautiful plants out there in 600-land! Wow!
Have been busy with a project that I just finished up.
Made an accessory for my bass today so I can embarrass myself with youtube vids of me covering various songs on my bass in a more interesting manner than the old "camera-on-a-tripod" view:
Will give it a full test later today.
I've already clamped it onto the head stock to check it out and the view goes all the way from the beginning of the fretboard (the "Nut") all the way the the to the bottom of the bass (hmm... the base of the bass, as it where) and used the A/V Out on the camera to view it through a television and it looks pretty cool.
I also made it reversible so I can get a similar view but from the base of the guitar body all the way up to the tip of the headstock.
whodatnation
Well-Known Member
Thats pretty dern nifty doob! lol I almost typed noob hehe. Iv also been busy today I got my diy water chiller twerking and I found my old cig packer and used it to make joints lol also just general tending to the ladies I'll throw some pics up.... hold you horses right here and dont change that dial! BRB
I got my diy water chiller twerking and I found my old cig packer and used it to make joints lol also just general tending to the ladies I'll throw some pics up.... hold you horses right here and dont change that dial! BRB
DoobieBrother
Well-Known Member
My left-hand finger tips can't feel much of anything smaller than 2mm across right now.
I've been working them pretty good, just in case.
Hmmm... damn! Going to play again for a little bit (love my new headphones for night time jamming).
Fingers are sliced from working the sheetmetal in a hurry, but that's never stopped me before.
But it's half past bong-o'clock.
Union Break!
Toke if you got'em!
Curious to see whodat's water chiller.
I heard it's run on flux capacitors and the tears of angels...
whodatnation
Well-Known Member
DoobieBrother
Well-Known Member
Bud pr0n and tech pr0n!
That's what I'm talkin' 'bout, Willis!
*edit: just before coming back tonight I re-loaded Motorola Phone Tools (for file transfers between cell phone & computer) and it's a small 30-megabyte install (I have a Quadcore Intel Q9450 overclocked to 3.51-gHz, so installs are pretty quick).
I decided to test myself, John Henry style, by racing the install with rolling a doobie from scratch.
It was a mighty battle of speed, accuracy and determination as the computer relentlessly unpacked files and rewrote the registry!
Starting with whole buds, I quickly crushed & ground up a joint's worth, got a rolling paper, loaded my rolling dollar up with it's precious cargo, and commenced to lovingly roll, pack & shape it for wrapping.
At the last second, just after packing both ends with extra weed and twisting them up I struck flame to the end and inhaled mightily!
As I exhaled, the install, bested and shamed by it's loss to a "mere" human, signaled it completion and admitted defeat with it's head bowed low, surrendering itself to terminal bit-rot and deletion from memory.. never more to travel the night...
In the battle of Man vs. Machine regarding doobie-fication....
MAN WON ! ! ! !
*edit: and that's a cool roller/packer set up, whodat!
That's what I'm talkin' 'bout, Willis!
*edit: just before coming back tonight I re-loaded Motorola Phone Tools (for file transfers between cell phone & computer) and it's a small 30-megabyte install (I have a Quadcore Intel Q9450 overclocked to 3.51-gHz, so installs are pretty quick).
I decided to test myself, John Henry style, by racing the install with rolling a doobie from scratch.
It was a mighty battle of speed, accuracy and determination as the computer relentlessly unpacked files and rewrote the registry!
Starting with whole buds, I quickly crushed & ground up a joint's worth, got a rolling paper, loaded my rolling dollar up with it's precious cargo, and commenced to lovingly roll, pack & shape it for wrapping.
At the last second, just after packing both ends with extra weed and twisting them up I struck flame to the end and inhaled mightily!
As I exhaled, the install, bested and shamed by it's loss to a "mere" human, signaled it completion and admitted defeat with it's head bowed low, surrendering itself to terminal bit-rot and deletion from memory.. never more to travel the night...
In the battle of Man vs. Machine regarding doobie-fication....
MAN WON ! ! ! !
*edit: and that's a cool roller/packer set up, whodat!
tip top toker
Well-Known Member
Always thought about buying a box of empties and one of those machines, how does the smoke compare if you leave the filter in? or do you remove it just prior t smoking? (if any difference at all of course)
whodatnation
Well-Known Member
Yeah I pulled the filter out but ripped it in half and put it back in. It was fine
as you can see I got lots more to do lollol dont tell Doob!My left-hand finger tips can't feel much of anything smaller than 2mm across right now.
I've been working them pretty good, just in case.
Hmmm... damn! Going to play again for a little bit (love my new headphones for night time jamming).
Fingers are sliced from working the sheetmetal in a hurry, but that's never stopped me before.
But it's half past bong-o'clock.
Union Break!
Toke it you got'em!
Curious to see whodat's water chiller.
I heard it's run on flux capacitors and the tears of angels...
tip top toker
Well-Known Member
I once had a afncy of buying the empties and also empty boxes, that could hold say 5 etc, and selling em at festivals etc. £10 and get 5 pre-rolled pure joints ready to go nowt better than that while banjoed in a muddy field 
something like that.
nowt better than that while banjoed in a muddy field something like that.
whodatnation
Well-Known Member
lol what are you smoking?!?!Bud pr0n and tech pr0n!
That's what I'm talkin' 'bout, Willis!
*edit: just before coming back tonight I re-loaded Motorola Phone Tools (for file transfers between cell phone & computer) and it's a small 30-megabyte install (I have a Quadcore Intel Q9450 overclocked to 3.51-gHz, so installs are pretty quick).
I decided to test myself, John Henry style, by racing the install with rolling a doobie from scratch.
It was a mighty battle of speed, accuracy and determination as the computer relentlessly unpacked files and rewrote the registry!
Starting with whole buds, I quickly crushed & ground up a joint's worth, got a rolling paper, loaded my rolling dollar up with it's precious cargo, and commenced to lovingly roll, pack & shape it for wrapping.
At the last second, just after packing both ends with extra weed and twisting them up I struck flame to the end and inhaled mightily!
As I exhaled, the install, bested and shamed by it's loss to a "mere" human, signaled it completion and admitted defeat with it's head bowed low, surrendering itself to terminal bit-rot and deletion from memory.. never more to travel the night...
In the battle of Man vs. Machine regarding doobie-fication....
MAN WON ! ! ! !
*edit: and that's a cool roller/packer set up, whodat!
thanks doob. That was an entertaining read, it had me at the edge of my seat the entire time!
Heres to Man, cheers!
DoobieBrother
Well-Known Member
I think someone Jeffery'd my joint, man!lol what are you smoking?!?!
thanks doob. That was an entertaining read, it had me at the edge of my seat the entire time!
Heres to Man, cheers!
whodatnation
Well-Known Member
Fuzzy walls doob, fuzzy wallsI think someone Jeffery'd my joint, man!
whodatnation
Well-Known Member
DoobieBrother
Well-Known Member
Yeah, I'm pretty close, but I have a hankering for a big bowl of chocolate ice cream soooo...
... off to the kitchen!
... off to the kitchen!
DoobieBrother
Well-Known Member
Real wicked looking buds, D !
DST
Well-Known Member
Cheers bru, it's hard not to want to pull em down. There are a couple of different phenos in the Engineers. The sat one looks like it might go even more dark/purply in colour, then there is the greener more CJ looker, and then an insane frosty fucker that looks like both the previous 2 but with different fan leaves. Bud structure is fairly even, but finishing time seems to differ slightly. I also have a couple more in seperate pots and one of them is on the finishing straight already...while the other is a few days behind. I am quite liking these flower trays to grow in. Nice and handy for my shelves.
Peace, DST
Peace, DST