Heisenbeans Genetics

Status
Not open for further replies.
VillageAnt

VillageAnt

Well-Known Member
Heisenbeans said:
Some new editions. These were put in veg kinda spaced out. I've had these cuts a while just not in DWC. Back left corner going left, GG4, Black banana cookies 9,Stardawg Corey,Sundae Driver, Lava Cake
Back right corner front row. Wedding Cake, GMO, Alien OG,Sunset Sherbert, Wedding Pie.
All that shit is dank. All these are getting reversed and I have quite a few cuts for seed moms
Purple punch and Adub are the last 2 for that system.
New crosses started tonight,

Mac1 x GG4
Ghost Og x GG4
Wedding Cake X wedding Pie
Wedding Cake S1s
Wedding Cake X Sundae Driver

View attachment 4277951

Wedding pie nice structure

View attachment 4277952
Click to expand...
Damn, those roots are gorgeous!
 
SCJedi

SCJedi

Well-Known Member
VillageAnt said:
Hlg exaggerates when they say the hlg 550 can replace a 1000 watt single ended HPS. Keep in mind that that fixture uses the 480 watt driver. I don't remember where I saw this, but if you look at the par/ppfd readings, it really takes 775 watts of QBs/strips to equal 1000 watt single ended HPS. People say we need 30 watts/sqft for QBs/strips, but, in my experience, you're better off in the 40 watt/sqft range.
Click to expand...
I have a DIY HLG 550, yep 480h-c2100B. I promise it's not enough for my 5x5. I was thinking about adding a second one and someone on the quantam board thread told me today that if I went with more than what I have I would have to use CO2. Stay high, lol.
 
Greenthumbs256

Greenthumbs256

Well-Known Member
SCJedi said:
I have a DIY HLG 550, yep 480h-c2100B. I promise it's not enough for my 5x5. I was thinking about adding a second one and someone on the quantam board thread told me today that if I went with more than what I have I would have to use CO2. Stay high, lol.
Click to expand...
what would u say for a 600, and a 4x4
 
SCJedi

SCJedi

Well-Known Member
Heisenbeans said:
Not so much an issue with meltdowns as it is with uneven lighting. I have my boards setup to run in series.
Click to expand...
I love wiring in series. It's so much safer than risking a runaway especially since I make my own lights. My wife would have a shit fit if I burned our house down.
 
Greenthumbs256

Greenthumbs256

Well-Known Member
when buying a fixture is there any chance of that runaway u guys talk about? that shit scares me, and i dam sure am not running any lights that could burn down my house at any Givin time just bc! I know theoretically any light can but the way you guys are making it sounds like it could be something very comon unfortunately I just don't know shit about this
 
Greenthumbs256

Greenthumbs256

Well-Known Member
SCJedi said:
Bulb or LED?

I think 600w LED is good for 4x4, 750-800w for 5x5. My 4 qb288s are on a slate 6 which is long and narrow. I could easily add a second one to my 5x5
Click to expand...
hlg 600h qb

my bad, sometimes I just assume ppl know what I'm talking about and don't even give half the info needed lol!
 
Greenthumbs256

Greenthumbs256

Well-Known Member
Greenthumbs256 said:
I'm down with that, especially if it's some bad ass heisen beans tshirts!!! have you thought about getting some made! I'd dam sure send some cash now for one of them!!!! @Heisenbeans
Click to expand...
@Heisenbeans come on man, heisen beans tshirts!!! I don't think I'm the only one who would want one!!! hell I'll preorder mine if need be!!! just use that logo u got! would be badass!!!

but no white plz god I destroy white! I'm sure most of us do!!
 
SCJedi

SCJedi

Well-Known Member
Greenthumbs256 said:
hlg 600h qb

my bad, sometimes I just assume ppl know what I'm talking about and don't even give half the info needed lol!
Click to expand...
Yes, that light s awesome for a 4x4.

If you buy a pre-made kit It is wired in series, or the DIY kit version from HLG or KINDLED,etc they typically do not send you a constant voltage driver so you would want to wire it up in series.
 
VillageAnt

VillageAnt

Well-Known Member
Greenthumbs256 said:
Ive got the gps cross, out of 11 only 1 lived! and so far well its garbage!

edit; never mind I'm thinking of the sundae driver cross!

really tho, I've had issues with most his beans, out of about 7 packs, didn't get 100% out of none! 2 packs got 1 or zero! now I may makes mistakes, but come on, it ain't that dam hard to pop some beans! I'll take blame for like 30% the rest are just garbage!
Click to expand...
Yeah man, with those GPS beans, there's just too much of a probability of shitty phenos. I had seven packs, traded all of them away except one, I'm still gonna get rid of that one.
 
Greenthumbs256

Greenthumbs256

Well-Known Member
SCJedi said:
Yes, that light s awesome for a 4x4.

If you buy a pre-made kit It is wired in series, or the DIY kit version from HLG or KINDLED,etc they typically do not send you a constant voltage driver so you would want to wire it up in series.
Click to expand...
sorry I appreciate you helping, but I don't understand any of that, I'd be buying them pre built, would I have any worries running them the way they come?
 
whytewidow

whytewidow

Well-Known Member
Heathen Raider said:
Like collecting sports cards nobody wants to miss out on the next 86 Fleer Jordan RC
Click to expand...
I've done some dumb shit in my life. And playing with a mj rookie card outside. When I was 6 is the top of the list. My mom still has the card. But its trashed. Its actually only a 1/3rd of a card now. Worthless. I had no idea he was going to be the greatest bball in the world. I wonder what they are worth now in mint cond.
 
whytewidow

whytewidow

Well-Known Member
VillageAnt said:
Hlg exaggerates when they say the hlg 550 can replace a 1000 watt single ended HPS. Keep in mind that that fixture uses the 480 watt driver. I don't remember where I saw this, but if you look at the par/ppfd readings, it really takes 775 watts of QBs/strips to equal 1000 watt single ended HPS. People say we need 30 watts/sqft for QBs/strips, but, in my experience, you're better off in the 40 watt/sqft range.
Click to expand...
30w sqft for veg. But it's really not enough for flowering unless it's a single plant. Spread out like a lady. I have 660w of Samsung f series gen 3s and 96 lm561c diode boards. And 4 red strips of 660nm and 672nm. It it will absolutely smash a 1khps. The hlg550 is close, but wont replace a 1k. I agree with you and I think growing abilities has alot to do with it as well.
 
VillageAnt

VillageAnt

Well-Known Member
Greenthumbs256 said:
@Heisenbeans come on man, heisen beans tshirts!!! I don't think I'm the only one who would want one!!! hell I'll preorder mine if need be!!! just use that logo u got! would be badass!!!

but no white plz god I destroy white! I'm sure most of us do!!
Click to expand...
Yeah, actually that Heisenberg face thing in white on a black T-shirt would look pretty awesome. Plus, I always thought it was a neat idea to get people to pay you to be a walking advertisement for you.
 
Status
Not open for further replies.
Top