First Grow - Criticism Wanted

Thanks! I had planned for a full month longer of veg man, I just didn't know any better haha!
At some point I realized how fast they were reaching the lights and was like whoa, I need to flip.
Dude give DWC a try. I bet you can set everything up for around 200 bucks if you are growing in soil already.
 
All this weighs around 6-8 pounds wet.
I will post dry pics and a weight when they go into jars in a week or so.
The first drying line is the purplish front right plant.
The second drying line pic is the back plant.
WP_20181027_20_19_12_Pro.jpg WP_20181028_01_14_51_Pro.jpg WP_20181027_20_56_03_Pro.jpg WP_20181027_15_14_41_Pro.jpg
 

Attachments

  • WP_20181027_20_19_25_Pro.jpg
    WP_20181027_20_19_25_Pro.jpg
    517 KB · Views: 9
Hope everyone enjoyed watching for the most part. I really cant think of anything I would do different, only ONE thing. I would have never switched to lucas in the first part of flower. I will stick with GH Trio. I caught the leaves fucking up pretty quick and fixed it so I do not think it was too big of a deal.
PH dropped like a motherfucker the last weeks of flower. You can see the roots were not the problem.
 
5BY5LEC said:
Hope everyone enjoyed watching for the most part. I really cant think of anything I would do different, only ONE thing. I would have never switched to lucas in the first part of flower. I will stick with GH Trio. I caught the leaves fucking up pretty quick and fixed it so I do not think it was too big of a deal.
PH dropped like a motherfucker the last weeks of flower. You can see the roots were not the problem.
Click to expand...
I must ask did you have any problems with clogging of your pipes? 1" seems normal for that build and you definitely had what appeared to be an amazing grow btw.
 
Thanks! Yes, twice I had to wiggle under the net, stick my hand into the bucket and pull the roots out of the piping.
The first time it was so bad I had to replace the 3/4 irrigation line going to the filter/pump because some of the roots broke off inside.
The second time I stuck a shower drain cap over the bulkhead end. It helped.
It is a problem I need to address for my next grow.
 
5BY5LEC said:
Thanks! Yes, twice I had to wiggle under the net, stick my hand into the bucket and pull the roots out of the piping.
The first time it was so bad I had to replace the 3/4 irrigation line going to the filter/pump because some of the roots broke off inside.
The second time I stuck a shower drain cap over the bulkhead end. It helped.
It is a problem I need to address for my next grow.
Click to expand...
I have noticed a lot of guys running 1" 1/2 pipe but suggest bigger but they are also in bigger tuff totes. I run the 12 gallon but others do the 20 gallon with bigger net pots. I personally run 1" 1/2 with 1/2" top feed/ waterfall and not had an issue as of yet (first run) but whatever you do im sure you will knock it of the park.
 
I'm in the middle of my 1st ever RDWC and I was terrified to use pipes that small for fear of clogging and ultimately overflows. I chose 2". What I have found is that once the roots get thick, they don't really go into the pipe anyway. They get so dense that it just doesn't happen. Personally, I still probably would not try anything less than 2" but I always error on the cautious/overkill side anyway.

3.jpg
 
Hot Diggity Sog said:
I'm in the middle of my 1st ever RDWC and I was terrified to use pipes that small for fear of clogging and ultimately overflows. I chose 2". What I have found is that once the roots get thick, they don't really go into the pipe anyway. They get so dense that it just doesn't happen. Personally, I still probably would not try anything less than 2" but I always error on the cautious/overkill side anyway.

View attachment 4223769
Click to expand...
Was going to go 2" but price wise it made more sense to do the 1" 1/2. do you run bulkheads or uniseals?
 
maxamus1 said:
Was going to go 2" but price wise it made more sense to do the 1" 1/2. do you run bulkheads or uniseals?
Click to expand...
Neither, actually. I considered them both but went with this instead:

3185k117l.gif 48315k960l.gif

Used silicone on both sides. I've done epoxy too and that is better but silicone works great too. This would not work on a cylindrical vessel but I'm using 27 gallon totes so I have nice flat surfaces.
 
Hot Diggity Sog said:
I'm in the middle of my 1st ever RDWC and I was terrified to use pipes that small for fear of clogging and ultimately overflows. I chose 2". What I have found is that once the roots get thick, they don't really go into the pipe anyway. They get so dense that it just doesn't happen. Personally, I still probably would not try anything less than 2" but I always error on the cautious/overkill side anyway.

View attachment 4223769
Click to expand...
That is a badass plant. I like the wood frames you mounted the led's on.
Yeah I did not realize how big the roots would get. Once I pulled out the first clog the root's did not grow aggressively into the pipes like before, I think they just kind of found the way in there the second time. The long part I pulled out is still trailing around at the bottom of the root ball. I will have to get a pic of it.
I am going to run some auto's in here I got from Seedsman next, just because I think they will fit this system better being smaller plants.
After that is 2x HDX totes and a 20 gallon rubbermaid can for a res. I see now two plants will fill a 5x5 no problem.
2" bulkheads and piping for sure.
 
You must log in or register to reply here.

Similar threads

S
Back on the RDWC train
Replies
0
Views
338
sandman007
S
D
Rockwool Block Holders
Replies
10
Views
406
DownUnderDog
D
Mass Medicinals
Free Grow Equipment (MA/NH - Local only)
Replies
6
Views
677
Mass Medicinals
Mass Medicinals
Jimski
Jimski's Grow Journal
2 3
Replies
44
Views
2K
Jimski
Jimski
N
Grow 2 Diary 1: DIY RDWC Grapefruit Haze
Replies
3
Views
542
Norlovestogrow
N
Back
Top