The Irish Growers Thread!

budsahoi said:
Avoid the plywood if you can.
Its very hard to wipe down and will eat paint.
Mold likes it too.
Click to expand...

Thanks for that buds would of never taught of mold,any ideas on timberin out the inside?want to insulate it aswell without building cavity walls,was thinkin of the plywood that has the insulaion fitted to it but its def is a no go if mold is fond of it.
ae86 grower said:
second this ... if your going blockwork,and as a shed i assume its 9inch cavitys for walls, so grab a few 3 inch solids and put up a partition wall even 4 inch solids...

i know you were depending on the blockwork for size, when the time comes see if you can pull the walls that bit on the lenght, width is fine...

flat roof or ridge...
Click to expand...

I was thinkin of buildin with 4in solids on the flat 86 want a good solid shed,ill probally go ridge roof was thinkin of a flat roof aswell
With the rigeroof ill have a bit of storage with the attic,ill cut in a partition with the 4in on there edge
Wont b startin for another month or two just doin my homework now
 
This past summer someone in the uk thread contructed an entire shed out of odd and ends and recycled pallets. With pictures. I'd refer you to him nidgy, but again, I can't remember who. Maybe bandit knows
 
ae86 grower said:
yeah bought from the shop, the clerk hadn`t a notion about the beans i wanted, butthey were helpful in the resppect they took my money hahahaha, ah i only deal with them as its in and out and cash....

also there only a 20 min drive away..
Click to expand...
Wow they got a brick and mortar walk in store. Can't beat that!
 
nidgy said:
Thanks for that buds would of never taught of mold,any ideas on timberin out the inside?want to insulate it aswell without building cavity walls,was thinkin of the plywood that has the insulaion fitted to it but its def is a no go if mold is fond of it.


I was thinkin of buildin with 4in solids on the flat 86 want a good solid shed,ill probally go ridge roof was thinkin of a flat roof aswell
With the rigeroof ill have a bit of storage with the attic,ill cut in a partition with the 4in on there edge
Wont b startin for another month or two just doin my homework now
Click to expand...


4in on the flat hahahaha sturdy as fuck, sure go with a 6in solid on its edge if thats whats in your mind...

i`d ridge it for storage, roof tile rather than a slate for saftey...
 
budsahoi said:
are your block building it?
Just batton the inside and sheet with thermo. nothing else needed
Click to expand...

Yes buds gonna block it 4in on the flat,gonna b a good solid shed
ae86 grower said:
4in on the flat hahahaha sturdy as fuck, sure go with a 6in solid on its edge if thats whats in your mind...

i`d ridge it for storage, roof tile rather than a slate for saftey...
Click to expand...

Gonna go with the 4in on the flat
God i hate layin six inche blocks killer on the back...haha
Soon as i get started ill post a few pics of the progress to the snd lads on the thread.
@eyelid i wouldnt make it out of pallets brick only u know the story about the three litlle pigs :wall:
 
GoGrow85 said:
I have my site sorted...im looking for something fast that will have big yeilds...my head is fukd from looking at seeds
Click to expand...

Same here, hard to recommend a go to strain when starting from scratch, a few of us on here are in the same boat, part of the fun is looking for the killer pheno's, get popping about ten seeds to start or twenty if doing regs. Or try and get your hands on an elite clone to save six months work, just watch for pests.
 
You must log in or register to reply here.
Back
Top