The UK Growers Thread!

lahadaextranjera said:
Don't you think they are past it? All the new growth is dying. Or do you mean the rooting lot?

1ml/ L Rhizo ph 5.8-6.0 more than that in the spray?
Click to expand...

Wouldn't worry to much about the ph, but I'd use boiled water in the spray
26 to 28 constant
4 days in dome with vents closed misting the dome once a day with your spray
7 days in dome with vents open, lifting dome every day for new air and spraying the clones every other day
2 days still under a weak cfl with dome off
Under the mh 4 feet away

And it's easier rooting in dirt in a solo cup, just a matter of dialing your moisture level in
Shouldn't need to water
 
R1b3n4 said:
Can you not split it down into smaller props? 1 for each batch etc, i use the smaller props for that exact reason etc

Also I found better results just wetting the plug with a pipette n leaving plant alone as opposed to spraying plant AND plug etc, with my cuts they only get watered/wetted 2-3 times roughly in the 2-3 weeks it takes em to root etc
Click to expand...
Yeah, I'll use another box. That way I can open the vent holes.

I like the watering by pipette. They seem a bit dry.
 
lahadaextranjera said:
Yeah, I'll use another box. That way I can open the vent holes.

I like the watering by pipette. They seem a bit dry.
Click to expand...

Mine need re-wetting about every 5`ish days roughly, just a few drops with a pipette to re-soak the plug etc, i use a very weak veg solution( canna Grow at about 0.25ml/L) n dont even bother ph`ing lol, vents stay closed on mine until at least half the prop is showing roots then i open the vent about halfway for a few days then fully open until they are taken out etc
 
I would agree with Yorkie. They got the black death on em. Get them away from the clones that have rooted. The rots in the leaves as well and it will only be a matter of time before it hits the healthy ones. Good luck.
 
21 site bucket cloner (can fit 2 per site to get 42 clones per run) with a 360o sprayer, a ball air stone and a coil of breather tubing.

Plain water straight from the tap, no PH and no humidity dome.

30 strong clones with a 100% success rate in a nice clean environment.

IMAG1779 - Copy.jpg IMAG1778 - Copy.jpg






Jiffy's and props are shit.
 
Ive got an aerocloning pot (?) but hate transplanting all the long roots through the net pots..

Bought this recently. I've got the bug!

E nail pipe. They charge by USB, no more lighters and getting my mits burnt!

Would you use one? Buy one? It's for taking dabs of extractions. They are only out this year.

image.jpg
 
lahadaextranjera said:
Ive got an aerocloning pot but hate transplanting all the long roots through the net pots..
Click to expand...

Common sense says you're leaving them too long and should be transplanting them earlier.

This is enough development to pot up....

IMAG1781 - Copy.jpg




You could do yourself a favour and cut the net pots on your cloner down with a pair of scissors.

You only need the rim of the pot to hold the foam collar in the hole.

The basket part is only useful to those who use pebbles and just transfer the clone in it's little pot of pebbles straight into the main system.
 
lahadaextranjera said:
Bought this recently. I've got the bug!

E nail pipe. They charge by USB, no more lighters and getting my mits burnt!

Would you use one? Buy one? It's for taking dabs of extractions. They are only out this year.

View attachment 3741839
Click to expand...

I'd use that.


I've just given a 1/2 oz for a used DaVinci Ascent vaporiser off my pal.

http://www.davincivaporizer.com/

They come with little glass bowls for extracts that sit inside the ceramic element where the weed would go.

Quite cool and rechargeable so proper portable, get about 2 hours use per charge.
 
The Yorkshireman said:
Common sense says you're leaving them too long and should be transplanting them earlier.

This is enough development to pot up....

View attachment 3741844



You could do yourself a favour and cut the net pots on your cloner down with a pair of scissors.

You only need the rim of the pot to hold the foam collar in the hole.

The basket part is only useful to those who use pebbles and just transfer the clone in it's little pot of pebbles straight into the main system.
Click to expand...


I'm actually gonna try it today. I'm taking advice, thanks!

I've got the aerocloner and I need to change things if I'm not happy.

Not used to clones damping off on me. :(
 
The Yorkshireman said:
@DST

Browsing in TK Maxx yesterday and came across this Cerruti track top/shell top/jacket.......

View attachment 3741818
View attachment 3741821
View attachment 3741822
View attachment 3741824


If I could have rocked it without looking like a complete chav I'd have had it. lol
Click to expand...
Fuk me the price on that (ok, it's a shell suit so would def be hard to pull it off without looking a tad chav like, lol). Jacket I was looking at in 89 was about the same price then:shock:. That things a bit too busy for my liking though. I prefer the understated look on the whole:cool: even if that does include bright Red jackets haha.
 
You must log in or register to reply here.
Back
Top