DarthBlazeAnthony
Well-Known Member
Where can I get hlg-80h-c700 lights?View attachment 3577020 Looks like the hlg-80h-c700 is the one you want. It will run 3 cxb's at .7a
Where can I get hlg-80h-c700 lights?View attachment 3577020 Looks like the hlg-80h-c700 is the one you want. It will run 3 cxb's at .7a
efficiencycan anybody tell me the difference between the HLG-120H-c1400 and the less expensive LPC-150-1400? both are 108 v and 150w.
more than that check out the warranties.efficiency
LPC gets to max 90%, while HLG gets to 94% at full load
one runs on both 110/220 volts [HLG] and one only runs on 220V [LPC-150] other MAJOR difference....efficiency
LPC gets to max 90%, while HLG gets to 94% at full load
Trc ElectronicsOK for the life of me i cannot find meanwell HLG 600 36 or 42 c series can someone send me a link as to where i can order these only ones i find is is 24 amp
i want to purchase 2 600's 2 - 240's and 2 185's dimable and make 2 units 1 - 1 - 1 drivers please and thank you
As well i am looking for cobs in 5000 or 6500 k and 3000 K range mixture per unit so online order link or number where i can get all what i need and that accepts Visa
what kind of cobs? at what current? that would help.....So is this what i am looking for and how many cobs can plug into it
http://www.trcelectronics.com/View/Mean-Well/HLG-600H-42B.shtml
i do not know can say i am green at this lol think i need to message some of the big boys and help me figure out WTF i needwhat kind of cobs? at what current? that would help.....
i do not know can say i am green at this lol think i need to message some of the big boys and help me figure out WTF i need
but plans were running one 600 a 240 and a 185 but seeing they have 320 maybe go one 600 with a 320 and a 240 but fuck me if i know what a A Series B series or C series means haha
as for cobs i will go with what people are saying is top bins and best choice i guess like i said i would like ?? 3590 6500 k and 3000 K 3590's in a mixed group on panel if it can be done
at first i wanted switchable you know 250 - 600- 1100 or max power etc
but now i really do not give a crap just make it dimable and run a wattage meter at the wall so i know what wattage i dimmed to so again fucking green but will build 3 driver units 2 of them now being 600 , 320 and 240 on one planel and same on other so i can run it against my nano's and see first hand if she will kill a true DE unit then i will place them inbetweeen nanos for future grows as suplimental lighting sure the hell not going to retire 6000 watts of new nano's View attachment 3577427
looks like the LPC only works on 240V)ie not suitable for the usa) like the ELG also cheapercan anybody tell me the difference between the HLG-120H-c1400 and the less expensive LPC-150-1400? both are 108 v and 150w.
I also did a trial run like that. I used Gavita 1000W Pro (boosted to 1150W) and I would get 2.75 pounds per light. With a 400W Cree CXB3070 1.4A fixture I got 30% more yield per watt.But most importantly i can then say to the ones that talk the talk with out even owning one WTF right and being 1160 true Cob wattage what a better side by side with 1150 De unit
this will be a true guage in overall performance she better pull 2.75 - 3 pounds first run or i be pissed with documented grow
http://www.mouser.com/ProductDetail/Mean-Well/ELG-100-C700B/?qs=sGAEpiMZZMt5PRBMPTWcaYoJ2bKEch7DHwN9Z9%2byzz6X%2bhiuKlqb9Q==I've got 12 CXB 3590's on the way ,it sounded like a nice number to start with
If you were doing a array with 12 what are the meanwells that will run them @ 50%
so I need pwr supplies with the best watts per cost for the meanwells is what I'm looking at & most efficient
i'd rather save power & buy more cobs is my mission
I'd shy away from a single meanwell because if I go the bar route i'd be a pia
multiple meanys are better
I know what I want but my headspins on the meanwell page ,looking for drivers to fill that want
can anyone point me in the direction
I run a on the grid solar array so efficiency is doubly important to me
as the solar array is paid off 10 years ago
I've got 12 CXB 3590's on the way ,it sounded like a nice number to start with
If you were doing a array with 12 what are the meanwells that will run them @ 50%
so I need pwr supplies with the best watts per cost for the meanwells is what I'm looking at & most efficient
i'd rather save power & buy more cobs is my mission
I'd shy away from a single meanwell because if I go the bar route i'd be a pia
multiple meanys are better
I know what I want but my headspins on the meanwell page ,looking for drivers to fill that want
can anyone point me in the direction
I run a on the grid solar array so efficiency is doubly important to me
as the solar array is paid off 10 years ago
I've got 12 CXB 3590's on the way ,it sounded like a nice number to start with
If you were doing a array with 12 what are the meanwells that will run them @ 50%
so I need pwr supplies with the best watts per cost for the meanwells is what I'm looking at & most efficient
i'd rather save power & buy more cobs is my mission
I'd shy away from a single meanwell because if I go the bar route i'd be a pia
multiple meanys are better
I know what I want but my headspins on the meanwell page ,looking for drivers to fill that want
can anyone point me in the direction
I run a on the grid solar array so efficiency is doubly important to me
as the solar array is paid off 10 years ago