pc/ultimate scrog grow yield!

JimmyKing

Member
Watch the bottom mate. Make sure you can find a tray that will fit in there. You don't want water pooling up in the bottom. Good lookin tho. *thumbs up*
 

herbal.experience

Active Member
Yes that was my first thought aswell..but the black ones are deeper? Someone said to me once on this site that rather go for deeper the wider pots? But I also thought the bigger ones..cool thanks! And another question, I have 200w in my signature grow, but I can only fit 2x65w daylight cfl in there..that won't to it for 2 weeks veg and then 12/12 in a scrog right? Or will that be enough?
just switched over from reading your thread.

(incase you dint know.. im subbed there also. -- not stalkin i swear.. lol)

# of plants your growing will determine your minimum watts of lights to use.

ive read that 100w minimum per plant and 50w per additional plants after.
(with some exception of the micro/pc grows i believe)

2x65(true watts) daylights should be plenty for 1 plant vegging
2x65(true watts) 2700k should be used for flowering.

keep in mind:
5000k-6500k daylights - vegging
2700k - flowering

you can also do a mix/full spectrum of 3:1 ratio.
 

Matchbox

Well-Known Member
check out my journal guys, yeah i got one of them CO2 rigs, not as expensive as you think, but well worth the investment in a larger grow area

https://www.rollitup.org/grow-journals/563027-polyarcturus-5star-general-thread.html
I'll have a flick through that when I get a chance! when I have a proper space to grow in I'll consider the CO2 business and just do one hardcore massive grow for posterity :)

Yes that was my first thought aswell..but the black ones are deeper? Someone said to me once on this site that rather go for deeper the wider pots? But I also thought the bigger ones..cool thanks! And another question, I have 200w in my signature grow, but I can only fit 2x65w daylight cfl in there..that won't to it for 2 weeks veg and then 12/12 in a scrog right? Or will that be enough?
Deeper is better because of how MJ root systems grow, but in such a small area it wont make much difference... If I were you, I'd get some 5litre Water bottles and cut them down to the right height, move your screen up a good few inches, measure about 7-10 inches from the lights and put it there, so long as your veg is just enough to fill the screen when you switch to flower the buds shouldn't touch the lights and being CFL's you can get quite close to them. This will also give you space for bigger pots.

Consider hempy pots, basically a bottle/bucket without drainage holes in the bottom, instead you cut a drainage hole about 1-2 inches above the base of the pot/bottle/bucket :) so a little reservoir pools in the bottom of the pot and drains out once it gets to a certain level, this is a very simple passive hydroponic setup and is tried and true, also very easy to maintain with next to no problems with the plant.

just switched over from reading your thread.

(incase you dint know.. im subbed there also. -- not stalkin i swear.. lol)

# of plants your growing will determine your minimum watts of lights to use.

ive read that 100w minimum per plant and 50w per additional plants after.
(with some exception of the micro/pc grows i believe)

2x65(true watts) daylights should be plenty for 1 plant vegging
2x65(true watts) 2700k should be used for flowering.

keep in mind:
5000k-6500k daylights - vegging
2700k - flowering

you can also do a mix/full spectrum of 3:1 ratio.
Something like that :) though I go by the philosophy of, as much light as can be controlled (temperature wise) in the cab, so if you have a bad ass ventilation system you can up the wattage... Like my cab, that is tiny but will soon be a 400w HPS or 500w LED setup.

Stay Frosty!
 

polyarcturus

Well-Known Member
unfortunately i had to drop co2 from my setup too much leaks in tents and the heat without a proper fan for the small space. :( ill be adding it back once i build a wooden cab eventually.
 

mr.lightgr3en

Active Member
UPDATE DAY 16
hey guys sorry im late on the update ive been really busy but here it goes.
im on day 16 still on 18/6 veg.
just repotted to its last pot with foxfarm ocean forest.
probably will start nutes next week. i am planning on vegging so i did a custom pic for you (MATCHBOX)? PIC 4
now from what i have understand i top the main stem a lil over the 2nd set of 3 bladed leaf right were the red line is at so i can get 4 main colas?
right? lol.. just let me know what you think and when should i add the screen. and so far the co2 looks like it has worked a lil my plants look healthier.
here it goes any advice is appreciated thanks??? happy growing and ive been looking at all your guyses grow keep it up guys and lets learn from eachother.
 

Attachments

Matchbox

Well-Known Member
Yup that looks about the right place for 4 main colas! Let it grow a touch taller so you can see better also makes the cut easier :)

I have the screen in from day 1 and leave enough space to get my hands under for maintenance, but yeah, looks good so far! Where does your water drain to? looks like it'll just pool in the bottom of the PC case... might want to change that if you can.
 

ImThaOne

Active Member
Subbed!-- lookin good so far cant wait to see how it all plays out. starting my own scrog in a few weeks & plan on using a speakrr for stealth
 

mr.lightgr3en

Active Member
(matchbox) alright sounds good thanks. Yea im going to let it recover from the stress of repotting then I'll top in a week.yea im trying to fix the drain thing still thinking on how. So for the buds how much distance I need between the lights and screen.

herbal.experience) and yea i am trying that out for this grow :)

(imtheone) thanks man and goodluvk on your grow
 

Matchbox

Well-Known Member
Well if you keep tucking under during the flowering 'stretch' phase then you only need about 6 inches or so the buds shouldn't grow too tall above the screen but it's all strain dependent.
 

indoormania

Active Member
Cool thank you, I will do some changes before I start with this grow. I connected the fans to their plugs today, still need to fill the puts with soil, set up lights etc but I still have time!

I saw one the other day, one of the pots you mentioned, a square one so I might try it out thanks!
 

indoormania

Active Member
Cool thank you, I will do some changes before I start with this grow. I connected the fans to their plugs today, still need to fill the puts with soil, set up lights etc but I still have time!

I saw one the other day, one of the pots you mentioned, a square one so I might try it out thanks!
 

weedgnome

Member
Oh mylar is tape lol I thought it was paint.. shows what I know xD. It looks pretty effective at keeping a good airflow and and keeping light from shining thru
 
Top