morgwar
Well-Known Member
Next project!
Going to canabilize my apollo 400s for drivers and heatsinks for the 8, vero 10 pendants and the 6 mystery chips that were running hot and over driven on the old anjit 1200 before the conversion
The anjit chips were super red and running at 36v 1200 ma hot as he!!
So the apollo drivers will have them at 600 ma which should cool em off enough
And since the apollo drivers run as high as 100 volts I can run 3 anjits in series or 2 anjeet + 1or 2 vero 10s per driver
In all I'll have 12, vero 18's running 1200 ma each 50/50 3500k/3000k,
8 vero 10's running @600 ma each (warm) at 3500 k
6 cheapo chinese chips running at 600 ma at what I think is 2500k heavy red
No idea on ppfd but if it isn't enough in a 3x3,
I simply give up!! Lol
Don't laugh at my blurple, burnt out apollo's they pulled 2 lbs for me total in less than a year between 3 grows
Going to canabilize my apollo 400s for drivers and heatsinks for the 8, vero 10 pendants and the 6 mystery chips that were running hot and over driven on the old anjit 1200 before the conversion
The anjit chips were super red and running at 36v 1200 ma hot as he!!
So the apollo drivers will have them at 600 ma which should cool em off enough
And since the apollo drivers run as high as 100 volts I can run 3 anjits in series or 2 anjeet + 1or 2 vero 10s per driver
In all I'll have 12, vero 18's running 1200 ma each 50/50 3500k/3000k,
8 vero 10's running @600 ma each (warm) at 3500 k
6 cheapo chinese chips running at 600 ma at what I think is 2500k heavy red
No idea on ppfd but if it isn't enough in a 3x3,
I simply give up!! Lol
Don't laugh at my blurple, burnt out apollo's they pulled 2 lbs for me total in less than a year between 3 grows