HeartlandHank
Well-Known Member
Like previous poster said.... Mimosa Hostillis (Jurema) Root Bark. But, prices have gone up recently. Kilo for 70 is no more. It's basically doubled, if you can find a good deal. Amazon no longer carries it either.
Look up the lazy mans tek.
I've never done this before, but I heard this is the way it would be done. And I am not telling you to do this. This is just a base/solvent extraction. It could be used to extract other things, legal, which i have done. I am no chemist. Just telling what works.
Put 112g mimosa hostillis root bark powder (dye) in the bottom of a large jar or bowl.
Fill a measuring cup with 750 ml filtered water.
Slowly add lye to the water. stir it in. it will get warm.
After you have mixed in 75ml of lye, and stirred it in, dump the water/lye mix into the mhrb powder in the jar.
lightly swirl the jar, do not shake, mix it until all the powder has been saturated, maybe 3-4 minutes.
then pour in naphtha or Besine. About 100 ml.
swirl the jar with the nathpha added, gently, do not shake. For about 3 minutes.
Let the jar sit for 3 minutes. The Naphtha will be sitting on the top as a layer.
Carefully dump the naphtha off into a pyrex pan. Be careful not to let any of the mhrb,water or lye (black goop) in the pyrex.
Add another 100 ml of naphtha and swirl again, dump off again.
Repeat this step 5 or 6 times.
Then, you find yourself with a pyrex pan full of solvent (naphtha or besine) and alkaloids. You wont be able to see the alk.
Sit the pan in front of a fan. Let the fan blow on it until it is completely dissolved. It can take days.
You will have orange crystals, whiter crystals, and orangish goop.
Scrape up the crystals and store for use. Take the orange goop, scrape it up, and then spread it into a very thin layer, put back in front of the fan.
after the goop dries out more (a few more days), it will be closer to crystal and ready to use as well.
Cleaner crystals and higher yields can be had. But the method described above is a very simple way to do it. It is the lazy mans tek but modified for mhrb powder, and leaving out the defat and recrystalization processes, which add to confusion for a first timer, and imo not necessary. If you want to do larger batches, just multiply all ingredients. If you use more naphtha then the above recipe, it makes for an easier extraction, but if you are concerned about impurities from the solvent, then the less you use the better... i personally feel naphtha is plenty clean considering doses are like 50mg, max.
You can do more "pulls" than 5 or 6, but you want to reheat the lye/water mix. You can rest the jar in a hot bath or just add more lye. The lye will heat when added to water.
You might want to get mhrb soon. it might not be available much longer. the price has doubled this year. A few more ethno store raids and it might be very difficult to aquire. if you only use for personal and just use on occasion..., a couple kilos of mhrb powder should get you nearly a life time supply.
DMT nexus is a good place. It's a forum. Sign up there and you will get all the help you need. But the above recipe if followed exactly will work. It really cannot be spelled out in an easier way or with an easier method. If you can't do this recipe, it's not going to happen.
Look up the lazy mans tek.
I've never done this before, but I heard this is the way it would be done. And I am not telling you to do this. This is just a base/solvent extraction. It could be used to extract other things, legal, which i have done. I am no chemist. Just telling what works.
Put 112g mimosa hostillis root bark powder (dye) in the bottom of a large jar or bowl.
Fill a measuring cup with 750 ml filtered water.
Slowly add lye to the water. stir it in. it will get warm.
After you have mixed in 75ml of lye, and stirred it in, dump the water/lye mix into the mhrb powder in the jar.
lightly swirl the jar, do not shake, mix it until all the powder has been saturated, maybe 3-4 minutes.
then pour in naphtha or Besine. About 100 ml.
swirl the jar with the nathpha added, gently, do not shake. For about 3 minutes.
Let the jar sit for 3 minutes. The Naphtha will be sitting on the top as a layer.
Carefully dump the naphtha off into a pyrex pan. Be careful not to let any of the mhrb,water or lye (black goop) in the pyrex.
Add another 100 ml of naphtha and swirl again, dump off again.
Repeat this step 5 or 6 times.
Then, you find yourself with a pyrex pan full of solvent (naphtha or besine) and alkaloids. You wont be able to see the alk.
Sit the pan in front of a fan. Let the fan blow on it until it is completely dissolved. It can take days.
You will have orange crystals, whiter crystals, and orangish goop.
Scrape up the crystals and store for use. Take the orange goop, scrape it up, and then spread it into a very thin layer, put back in front of the fan.
after the goop dries out more (a few more days), it will be closer to crystal and ready to use as well.
Cleaner crystals and higher yields can be had. But the method described above is a very simple way to do it. It is the lazy mans tek but modified for mhrb powder, and leaving out the defat and recrystalization processes, which add to confusion for a first timer, and imo not necessary. If you want to do larger batches, just multiply all ingredients. If you use more naphtha then the above recipe, it makes for an easier extraction, but if you are concerned about impurities from the solvent, then the less you use the better... i personally feel naphtha is plenty clean considering doses are like 50mg, max.
You can do more "pulls" than 5 or 6, but you want to reheat the lye/water mix. You can rest the jar in a hot bath or just add more lye. The lye will heat when added to water.
You might want to get mhrb soon. it might not be available much longer. the price has doubled this year. A few more ethno store raids and it might be very difficult to aquire. if you only use for personal and just use on occasion..., a couple kilos of mhrb powder should get you nearly a life time supply.
DMT nexus is a good place. It's a forum. Sign up there and you will get all the help you need. But the above recipe if followed exactly will work. It really cannot be spelled out in an easier way or with an easier method. If you can't do this recipe, it's not going to happen.
