• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

Search results

  1. SnapsProvolone

    Mold in the air?

    Obviously too much humidity. Ditching the dome gets harder the softer your cuts get from being in the high humidity dome. I might add that rapid rooters are ten times better than rockwool which is a favorite of powdery mildew.
  2. SnapsProvolone

    responding...

    I hold back because it ends up a pissing match and usually way off topic.
  3. SnapsProvolone

    Strange buildup/residue in reclaim

    Don't know what it is for sure but a cleanup might be in order. http://skunkpharmresearch.com/getting-the-green-and-waxes-out-afterwards/ Read about the Alcohol Hexane wash of roaches...
  4. SnapsProvolone

    Outdoor 12x32 shed

    A dual head mini split would be able to handle both rooms perfectly and eliminates the need for a ling room.
  5. SnapsProvolone

    winterizing ftw

    I do my nug runs at -25f (tane & dry column) and then I winterize at -25f with UV burst, to kill any green from the grind, for 72+ hrs, (yup still get a little wax dump). Vacuum through whatman 1 buchner and purge at ambient via thin film to snap taffy, the results are sublime in the magnitude...
  6. SnapsProvolone

    Monster shiva skunk in amsterdam

    I used to grow Shiva (landrace) about 15 years ago. Wish I could obtain clean landrace Shiva genetics again. Best indica stone I ever had and gram per watt yield was so easy to obtain with short 60 day flowering.
  7. SnapsProvolone

    Two Plant DWC - easy 3 to 4 pounds with 2kW

    Says one that quotes (presently) 7 posts by 4 others. What's your agenda? Make yourself look good (epic fail) or troll to make others look bad (best left to the OP). GET A LIFE.
  8. SnapsProvolone

    Noooo! My trophy....!

    Who cares about likes. Only those with low self-esteem or those that live for praise. Seriously, I care not about likes and would politely ask everyone to refrain from giving me any likes unless you feel like sucking my cock. I remember overgrow d0t com back in the old days. We didn't...
  9. SnapsProvolone

    Metal Halide vs Fluorescent?

    You get more lumens per watt with hid (mh or hps). Power in equals power out. If it's not making lumens, its making heat. So fluorescents make more btu/hr per lumen than hid even if they seem cooler, there is greater surface area and more watts are required to provide equivalent lighting...
  10. SnapsProvolone

    Two Plant DWC - easy 3 to 4 pounds with 2kW

    Each res holds 20 gallons. No CO2 in this room. At our labs we have one sealed ac/co2 flower room and one identical but unsealed sans co2 and AC.
  11. SnapsProvolone

    Two Plant DWC - easy 3 to 4 pounds with 2kW

    We don't lolipop since there are other lights in the room, those bottoms amount to something, and we blast entire harvest for bho sans trimming. Can't sell it so may as well put it into bho for the GRU staff. Confidence is required as we are under NDA related to testing of the ballasts...
  12. SnapsProvolone

    Distilled drinking alcohol & pesticide concentration

    I'm not talking about beer, only distilled (concentrated) alcohol. I assumed perhaps the breakdown byproducts might be more likely as much heat is involved in distillation. Really just looking for any known study results. Not guesses.
  13. SnapsProvolone

    Two Plant DWC - easy 3 to 4 pounds with 2kW

    2kW @ 1 plant per kW This easily does 3 to 4 pounds dependent on strain. No supplemental CO2 in this room. These are 25 days into 12/12 Strains are confidential. Ballasts being used are confidential. Bulbs are Super Hortilux. Nutrients are GH Flora base nutrients, CaliMagic and RO H2O...
  14. SnapsProvolone

    I am paying far to much for power,what can i do to pay less?

    Every provider is different. Some plans charge less for nighttime kWh (off peak)
  15. SnapsProvolone

    Best DE HPS Setup?

    It is the ballast to lamp cord that indeed acts as an antenna to broadcast RF. Use of shielded cable that is bonded to a low ohm ground has limited but not eliminated this phenomenon in my experience. High frequency ballasts are the offending culprits. Low frequency square wave has a better...
  16. SnapsProvolone

    Hydro - How many days you FLUSH for ??

    Independent tests have been performed. Lol
  17. SnapsProvolone

    Best DE HPS Setup?

    Soundx like a sales pitch. Note you can't trust manufacturer claims. Independent sources are best. Gavita Pro is where it's at gor DE HPS.
  18. SnapsProvolone

    Mold in the air?

    Heat mats speed rooting, once roots pop shut it off.
  19. SnapsProvolone

    Mold in the air?

    Ditch the dome. It just softens your cuts. Dip fresh cuts in antiwilt if you must. Dont blow fans on them. They might droop a bit first few days but unless light, heat or airflow is too intense you'll not need a dome.
Top