Search results

To dehu really well, try dropping those core remps. ;) I've given you all I got. :)

You should lift the net pot to check your roots regularly to be sure they are nice and white.

One could get most of it done with standard lengths I suspect. Then a trip to a local pipefitter, plumbing supply house or even some nicer hardware stores could get your pipe threading issues worked out. Some commercial electricians could be of assistance if they do a shit ton of RMC and thus...

Strength depends on system type, medium used, plant age and strain, not to mention overall health and environmental factors. I've had the same strain peak at 1500ppm @ 0.5 in a dwc but only tolerate 1000ppm @ 0.5 in a flood & drain table with hydroton medium.

Your original question regarded making money. I only explained what you already knew. That said, one could take your position that laws are just as easy to break in Colorado as they are in Texas, albeit Texas penalties might be harsher. That said, the feds may or may not be the ones handling...

One could reframe the tent using 1/2" galvanized pipe. They make the 3 way corners and surface mount flanges that would make good feet. That's the industrial grade fix..

If indoors, not flowering I would recommend imidacloprid.

This is exactly what NOT to do. Properly identifying your pest/s is the only way to formulate an effective management strategy. Misidentification leads to wasted applications and an even larger pest problem.

No legal way for a grower to be remunerated for their efforts unless working under a state licensed MMC or RMC. As you stated, 2 year residency required to pull a license, then you must pass FBI background check and various associated wallet checks. Note many local ordinances prohibit or...

Simply put, your system isn't 24kbtu IF your restraint is ideal reservoir temps. PERHAPS, send 55 degree water through the air exchanger to warm the water prior to it hitting the reservoir exchanger? Even more tuned, a bypass solenoid valve / cooling thermostat with remote probe arrangement to...

Asking that system to do over 14kbtu/hr is pushing it unless you can get those cores chillier than mid 60's. Dehu rates will jump up if we can knock that core temp down another 10 degrees.

You need to get that core down into the low to mid 50's or add significant additional core area. Your cold water any cooler than the core, perhaps increased flow rates?

Sometimes those mechanical timers loose a bit of the "ear" that those little pegs hit to activate a on cycle. Replace the timer with a better digital one with battery backup is a likely course of action.

How many cfm are you blowing through the air handler. How many watts you running? Room volume?

What is the temperature of your air handler coil? Room temp?

Sealed CO2 or ventilated? What exactly seems to be the problem? High rh all the time?

If its not a float switch its usually the timer.

The electronic float switches on those are a common issue. Check them with a meter to see their innards aren't stuck.

I cant confirm or deny la confidential genetics, but it is a cross from bean, vegged with moms under a 600 watt hps on a light rail mover. It provided ample clones before ending up in flower.

Agreed, I would love to run some bare verts but it wouldn't serve the purposes of this particular test. :( in the future it may happen. Still waiting on some 600 watt prototypes to test. ;)