Search results

You have mentioned this before. I looked up the driver it was a 48a so the ebs wouldnt work... But what strips are you talking about that would work with this driver ? That would be cheaper than running the eb gen 2 at 1.4 amps ? Thanks bud

Exactly what im thinking bud !! That's absolutely amazing you do not NEED a heatsink at 1400ma will definitely be ordering 1/16 angle or 1/8th flat bar. Let me add it all up see where im at price per fixture. I'll do figures running at 700ma 1050ma 1400ma And compare.

This is exactly what im talking about! @Randomblame you are incredibly knowledgeable. Thank you so much for your information. Now one more question... running them at full bore will they be as/more efficient as hlg 288 boards running at full bore ? Cause i see @Or_Gro KILLING it with 8 qb...

Should really look a little harder before i post... i was sble to find angle aluminum 1x1x⅛x48 for $237(including shipping) for 50 ($3.74/ea) for about $1400 i can build 3 600 watt bridgelux strip lights Each fixture would consist of~ 16 - BXEB-L1120Z-35E4000-C-B3 1- hlg-600-42a 16 -...

I can get 50- aluminium 6061 1x⅛x48 flats for $100!!! Would it work at 1050 ma using bxeb-l1120's @Randomblame you have any suggestions ? Ive noticed you have ALOT of valuable information. Thank you

If i built a 48x48 frame then spaced the 16 strips 2 inches apart i could then rearrange down the road to fit 24 strips with 1 inch spacing . Though it would only cost about $340 in strips to get efficiency down to 700ma on the 3 600 watt setups. Im aware im going to need about 700-800 watts...

So ive really been thinking and the end goal is to have the most efficient light i can build at a reasonable cost. If i could use strips and run them at 1050ma using 16 strips per hlg-600h-42 i could buy 50 strips for $684.80 off digikey (not in stock) then 3 hlg-600h-42 for $447 those two...

*** all dates appropriate

4/24/19 for the 3000k

Umm check again... 4/7/19 is what it says on digikey. For the 3500k. Haven't checked the 3000k

April

Quite the price difference between the samsung f series 4footers and the bridgelux eb gen 2 4 footers...

How much height is necessary with those hlg elite 96 v2's ? I'll have 8ft ceilings.

Yeah i saw the voltage was a tad high. I was checking out the f strips but the diode count is lower on on the samsungs then the bridgelux. But Yes Samsungs more efficient

Thank you sir !! 50 peices would cost me $232. But.... shipping is $80!! Still 90 dollars cheaper...

Whats going on everyone, in the planning stages of building an led to cover a 4x12 grow space once we get settled into our new home! The 4x12 area will be broken down into 3 separate 4x4 trays will most likely be using Autopots (testing them out as we speak) Right now im rocking a 260 watt...

Hey what's going on everyone. Got a couple questions on the bho process. Yes I know the fundamentals yes I've done this many times before... I'm just wondering if anyone else has taken fresh frozen nugs and used dry ice and a 160 micron bag to make dry ice then turn that into bho ? At the...

Also if you say no to the canned butane why are all the starter kits used with canned butane?

Would love to no where you got your info from.... They have canned butane for lighters that yes has propane and mystery oil... Then also Have 99.9999 % n-Butane in a can. So again would love to know where you got your Info. Maybe I'm wrong....

i found the aluminum 6061flat bar is a bit cheaper could do that hooked to angle aluminum. ifi did this i could even mount some 120mm pc fans on top to cool it all down that would also keep the heats from rising into the above grow space.