HLG vs HGL Side By Side

[tstick]

Not to argue, but I don't grow for respect. I do pretty well most of the time. I've tried all kinds of lights over the years. I grow all kinds of other plants, too, and I enjoy the process of growing plants, in general. One time, I grew an heirloom tomato that weighed almost 4 pounds! It was like a "siamese" tomato. Delicious! Anyway, I digress...

 

[OneHitDone]

Not personally or on this forum either......i intend to buy one for the new "grow room", if that ever happens; who the fuck knows.

Guess you'll have to be the Guinea pig on this one, Amazon reviews are pretty good still I think?

Ok brother PSUAGRO. even though we been butting heads lately I sill love ya homie!
So I will keep you posted on the skinny with the Terra-Bloom fan and once you get a new spot set up I'll even lace you up with the 411 on the new hot led's on the market

 

[sethimus]

Somehow you seem to only settle on cheap china tech, what gives? Try some german powered swiss engineered carbon active fan for once, not these little toy fans...

 

[sethimus]

cute, but no pabst motor. would not use

 

[OneHitDone]

cute, but no pabst motor. would not use

Here's your Fine German engineering

 

[sethimus]

deflecting, as always

 

[hillbill]

Damn, that is so blurple. Hillbill hates blurple.

 

[OneHitDone]

deflecting, as always

Yes, you new the master of deflection it would appear

 

[hybridway2]

Here is the XB-400, remote driver series being mapped & uses the original 50w boards used in the first production run.

Second production run will be like mine here, sporting the new, simplistic yet still 91% efficient (so said) OnBoard Drivers coupled with the 35w board array.
Here is one of my XB-140'S that all arrived yesterday. 18" x 18" / 140w. Pretty Quick especially going from day one of the idea that is based on your growers feedback to what is desired in an led grow light but still the original HGL spectrum. No damn Dimmers tho. Lenses will be adapted to these optionally & are being made now.
HGL modified from using the community recomended HighEnd components to the highest performing components per dollar based on their tests. Maximum performance/$ is her said inteanded goal hence one reason they dont use Cree, Oslon or MeanWell.
I will try to keep you all posted on any info. I receive regarding the HLG-Trinity & HydroGrow-XB-Boards.
Edittted: Misinformation guesstimate erased.
The Trinity IR'd in @ 135. Where the diodes are, 126• the in center, 130• on the edge. Fan at even plain was off for 1/2 hr. Was hard to get the 135 pic cuz so bright. Prob need to come from above.
120• w/ regular room fan on. Its just a pcb though. So thars pretty good with no sink.
Was no real way to measure the 84X so i got the laser on the heat sink which is passively cooled.

 

[1212ham]

Second production run will be like mine here, sporting the new, simplistic yet still 91% efficient (so said) OnBoard Drivers coupled with the 35w board array.

Exposed 120 VAC power, looks exciting! (Pun intended)

 

[hybridway2]

Exposed 120 VAC power, looks exciting! (Pun intended)

I wonder how the components hold up against a good foliar feed? Or mite washing?
There are lenses that will cover both leds & driver but if they're not on - IDK.
Just found out there will be a separate cover for the drivers that will work in conjunction with the lens.

 

[hybridway2]

Close to equal trich development maturity. Mostly cloudy & almost ready. White hairs still griwing or not, i will not go 1/2 cloudy, 1/2 Amber.

 

[10WeekFlushBro]

View attachment 4391026

This world is not my home... I'm going up yonder where there is no electricity. After I touch this board with my hands.

 

[grilledcheese101]

Is that driverless? Sounds sketchy af. I ordered a couple of those driverless chips on ebay to play with. They get hot as hell even with a heat sink.

 

[OneHitDone]

Exposed 120 VAC power, looks exciting! (Pun intended)

This world is not my home... I'm going up yonder where there is no electricity. After I touch this board with my hands.

Admittedly at times I am not the most thorough at reading threads and post shit while missing details but you guys are kinda a bit much.
I think it is 2 or maybe 3 times now that it has been stated that these are the first run prototypes and that a cover for the driver components as well as a lens are being developed as we "speak".
Step it up a notch guys

 

[sethimus]

strange, Samsung, HLG, Cutter et al all don‘t need covers, i wonder why that is...

 

[lukio]

shite lights. shite company. shite shills. shite forum (the other one)

no 3x the yield or heavier trich production, ALL of her claims are bullshit.

 

[OneHitDone]

strange, Samsung, HLG, Cutter et al all don‘t need covers, i wonder why that is...

Bravo!! Another intelligent post by sethimus

 

[1212ham]

I think it is 2 or maybe 3 times now that it has been stated that these are the first run prototypes and that a cover for the driver components as well as a lens are being developed as we "speak".
Step it up a notch guys

You seem confused. The cover for the driver was not mentioned until AFTER I pointed out the exposed 120 VAC.
In response to my post, hybridway2 posted "Just found out there will be a separate cover for the drivers that will work in conjunction with the lens."

Admittedly at times I am not the most thorough at reading threads and post shit while missing details

 

[Ryante55]

Admittedly at times I am not the most thorough at reading threads and post shit while missing details but you guys are kinda a bit much.
I think it is 2 or maybe 3 times now that it has been stated that these are the first run prototypes and that a cover for the driver components as well as a lens are being developed as we "speak".
Step it up a notch guys

They are also optional an who knows how expensive. Onboard drivers have always been garbage maybe Cammie should get her boards tested for once