Is this bud robot or light hotspot
- Thread starter pollen205
- Start date
Roger A. Shrubber
Well-Known Member
peel it apart gently, see if there is any rot inside. it may just be those couple of leaves rotting. pull them out and get rid of them, they could be a starting point for botrytis.
if it looks good inside, leave it but keep an eye on it. if there is any suggestion of rot, get rid of it, and check the rest of the plant carefully.
i'm guessing it's inside, since you suggest the possibility of light hot spot. try to keep your RH in your flowering area under 50%, that will make it much more difficult for any kind of mold to get started
if it looks good inside, leave it but keep an eye on it. if there is any suggestion of rot, get rid of it, and check the rest of the plant carefully.
i'm guessing it's inside, since you suggest the possibility of light hot spot. try to keep your RH in your flowering area under 50%, that will make it much more difficult for any kind of mold to get started
coreywebster
Well-Known Member
Pull on the bronze leaf and if it comes out its rot.
Uncle Reefer
Well-Known Member
yes pull out those brown leaves, my first impression is that your RH is too high at night and the core of the buds are dropping the temp to the dew point and water is forming at the cores. If I am right, get a dehuie in there
I pull them out and they pull really easy..does mold now stay from the spot That I pull
Please guys some advice how to save plant now... Cant get dehumidifier
I have 7 days more I think...
Will this progress
Uncle Reefer
Well-Known Member
Well, do what you can to keep the temp and humidity from hitting the dew point, vent at night, pay attention to your temp and RH, print out a dewpoint chart.
Roger A. Shrubber
Well-Known Member
i agree except he just said today that he added a larger light and his temps rose and rh dropped. if it stays at 30 at night, he shouldn't have any mold problems. could actually use a humidifier when the lights are on. probably would be a good idea it put it on a timer so it goes off with the lights
Wtf ? I didnt say anything about light ??? Or rh and temp
I have diy cobs from start to finish
How Will dewpoint chart help me..
coreywebster
Well-Known Member
Well if they pull out with no resistance then its highly likely to be rot in the inner of the bud, it eats through the stem of the leaf where it meets the stalk which stops nutrients been able to move to the leaf and the leaf ends up looking like it did.I pull them out and they pull really easy..does mold now stay from the spot That I pull
Please guys some advice how to save plant now... Cant get dehumidifier
I have 7 days more I think...
Will this progress
Its an early indicator.
Now you should put on some gloves and open the bud where that leaf was and it will likely be grey or brown inside.
If it is then you need to remove the buds affected and get them flushed down the toilet.
If you do that I would turn of circulation fans and avoid touching what you don't need to.
It could be localized to a couple of bigger buds, lets hope that's the case..
I have seen it lots of times with strains that grow large colas and often its only on one cola or part of one.
Some strains are far more prone to it and other far more resistant. But environment is key to keeping the likely hood of it happening down.
Wish you write this down yesterday...
Fuckfuck fuck
I only remove That 2 leaves yesterday and leaved That bud on the plant...
To be more sad story I put 1 big fan more in my tent...
So now That shit can fly to all colas
Omfg what I did
Master_Tabi
Well-Known Member
Chill man, the rot wont form if you do what these guys are telling you todo. Im not an expert, but what can be done is chop off any moldy buds...do that immediately. Why chance it you know? The spores are there and will be there thats not the problem, your environment is the issue.
Good luck.
Oh also a method used, tie the buds so that they separate used strings and metal wires.
Good luck.
Oh also a method used, tie the buds so that they separate used strings and metal wires.
Last edited:
GBAUTO
Well-Known Member
pollen, I feel your pain.
It's difficult to watch your girls fall apart after so much effort.
I run into BR on EVERY outdoor grow-just trim out what you can and give it as much ventilation as possible.
I haven't had ANY issues on my indoor grows-no dehueys just good ventilation has kept it at bay.
It's difficult to watch your girls fall apart after so much effort.
I run into BR on EVERY outdoor grow-just trim out what you can and give it as much ventilation as possible.
I haven't had ANY issues on my indoor grows-no dehueys just good ventilation has kept it at bay.
I remove that branch completly...
And bud rot really inside that spot...
Low and up nothing but at that spot is that shit and bud start roting inside really good...
The rest of the plant look to me good but buds are sooo dense that I can even look inside...I mean rock fucking hard and if I want look inside I will break bud...
Open tent after night and rh is 72% my hydrometer is on the floor next to smart pot and I water yesterday so really hope that is why the rh is so high...
Add one more big fan yesterday and now every colas moving really good but really dont know what is indide of every bud/ colas
Trichomes still not ready...good number of cloudy but amber colors is hard to find...
What to do guys...?
And bud rot really inside that spot...
Low and up nothing but at that spot is that shit and bud start roting inside really good...
The rest of the plant look to me good but buds are sooo dense that I can even look inside...I mean rock fucking hard and if I want look inside I will break bud...
Open tent after night and rh is 72% my hydrometer is on the floor next to smart pot and I water yesterday so really hope that is why the rh is so high...
Add one more big fan yesterday and now every colas moving really good but really dont know what is indide of every bud/ colas
Trichomes still not ready...good number of cloudy but amber colors is hard to find...
What to do guys...?