ILikeBigBudz87
Member
My house stays around 55 percent tent varies from 30 to 40. But nice point on the humidity. When i go back to veg its 60 to 80
Order fake LM561C's from Alibaba....
- Thread starter conversekidz
- Start date
conversekidz
Well-Known Member
How are you able to keep your tent so much lower than your house without a de-humidifier? If you have proper air exchange with the room and tent, the tent humidity would maintain around 55....
ILikeBigBudz87
Member
Heater
ILikeBigBudz87
Member
That should do it
justsmokedope
Well-Known Member
considering that fake boards aren't fake necessarily just just do your home work you have to work out if they are a middleman or the actual manufacturer so ask propper questions also original boards are made in china too , you have to realise when dealing with china they will trip over backwards to make a sale and every thing is made to order so there is a wait and need paying upfront
nc208
Well-Known Member
The manufacturer is Samsung so anyone you deal with outside of buying from Samsung is a middleman. Half the vendors on Alibaba couldn't care about you so your odds of getting the product you pay for are 50%. Are you sure HLG boards are being made in China
justsmokedope
Well-Known Member
yes they certainly used to be hanson technology i believe i went though this while back while researching board manufacturers even asked hlg who confirmed it , i wouldn't knock chinna too much as i know in my house most of my stuff has been made there or has parts from there
at the end of the day you have to ask for proof from the suppliers and do your research thats down to you . chinna does business differently than we do in the uk and does feel a bit dodgy at times its also like a barter system, also you don't have to buy a lot you can do a test order you can do the enscrew payments which means you can get your money back or some of it if what you buy some thing and it not correct . as its so far away it does feel like your money is going into the either i've done lots of transactions and all have been great
nc208
Well-Known Member
Why are you badmouthing China? Please don't bring Race or anything like that into the discussion. Stick to the topic at hand please. And to clarify your misinformation HLG used to deal with Hanson, they do not still do as you wrote in your post above.
ANC
Well-Known Member
Take that fuse shit off, mate.
Your circuit was fine until you added that shit.
Now it is an unsafe, hazardous mess.
The drivers have protection circuits inside that will override it in case of most errors.
All you need to do is provide a safe connection to a plug and make sure there is electrical conductivity from the driver to all heatsinks so the stuff can be grounded..
Your circuit was fine until you added that shit.
Now it is an unsafe, hazardous mess.
The drivers have protection circuits inside that will override it in case of most errors.
All you need to do is provide a safe connection to a plug and make sure there is electrical conductivity from the driver to all heatsinks so the stuff can be grounded..
justsmokedope
Well-Known Member
im not bad mouthing chinna and you need to read what i wrote i never said they still did i said they certainly used to use them , as well as other chinese manufacturers has hlg told you this info or did you just make it up
nc208
Well-Known Member
See this is where you said they are being made in china. You should go back and read what you posted.
Last edited:
justsmokedope
Well-Known Member
read this and then tell me im wrong lol not sure if others can read this though https://www.rollitup.org/conversations/led-project.906246/
how ever they might now have changed were they make them i saw that they were going to put the samsung name on their boards but this prob just as they use there chips not that samsung are making there boards i suspect
Last edited:
The original hlg boards were made in China they only had the 304 boards at first that were lm561b or s5 bin the old company name was northern grow lights. They changed names and made the 288 after like a year they started us production.
nc208
Well-Known Member
We all know they were originally made in China. That's why I corrected your above post to clarify they are no longer being made there. Not sure why your having such a hissy fit when all I did was correct the fact that they are not currently being made there.
conversekidz
Well-Known Member
Stop messing up my thread!!!
This is only about fake LED's from Alibaba that grows fake weed!
This is only about fake LED's from Alibaba that grows fake weed!
conversekidz
Well-Known Member
@ILikeBigBudz87 ....don't listen to him....It clearly is lacking the proper amount of duct tape to make it safe...aka add more duct tape!
Schalalala
Active Member
Huge chip - i think it is a LM561C.