Help with my 4x8

What should i do with the light?

  • Keep 2 600watts?

    Votes: 1 50.0%

  • Keep 1 600 and 1 900?

    Votes: 0 0.0%

  • Keep all 3?

    Votes: 1 50.0%
  • Total voters
    2
theflowerman.dc

theflowerman.dc

Active Member
hello everyone,
I am new to this forum, i am a local grower from dc,

So i an setting up my 4x8 tent,
So far i have 800cfm filter and 8in fan combo for my exhaust,
2 600 w viparspectra LED

I got thirteen 5 gallon smart pots and two 7 gallon smart pots, all clones that i picked up from a friend. Grow tent was set up a week ago.

So i feel like my light is not bright enough,

Questions 1: I picked up a viparspectra 900w from a local grower for a steal, i was thinking about adding the 900 in the middle along with 600 on each side,
Would that too much?

Questions 2; i have couple small 4 and 6 inch fan in each corner and exhaust is on lowest setting and my humidity is at 70-78 . What should i do?

Question 3: after this first batch or right when i put these in flower, if i want to have a small area for veg or clones so i can have rotation going how can divide a small 2 x4 area or 3x4 area for veg room and keep the 5 or 6 x 8 for flower.

Thanks everyone looking forward for all the help.
 
jonsnow399

jonsnow399

Well-Known Member
theflowerman.dc said:
hello everyone,
I am new to this forum, i am a local grower from dc,

So i an setting up my 4x8 tent,
So far i have 800cfm filter and 8in fan combo for my exhaust,
2 600 w viparspectra LED

I got thirteen 5 gallon smart pots and two 7 gallon smart pots, all clones that i picked up from a friend. Grow tent was set up a week ago.

So i feel like my light is not bright enough,

Questions 1: I picked up a viparspectra 900w from a local grower for a steal, i was thinking about adding the 900 in the middle along with 600 on each side,
Would that too much?

Questions 2; i have couple small 4 and 6 inch fan in each corner and exhaust is on lowest setting and my humidity is at 70-78 . What should i do?

Question 3: after this first batch or right when i put these in flower, if i want to have a small area for veg or clones so i can have rotation going how can divide a small 2 x4 area or 3x4 area for veg room and keep the 5 or 6 x 8 for flower.

Thanks everyone looking forward for all the help.
Click to expand...
option 4 sell all 3 junk lights and buy cobs or some other decent led's
 
SoOLED

SoOLED

Well-Known Member
All of those would do a 4x4, pretty nice. If you could split the tent(get it light tight) you could Veg/flower in each 4x4. Each 600 is like 200 from the wall and the 900 300, for. Total of 700watts. I guessing but all those lights are kind of the same.

I don't know how to split a tent like that. Duct tape and foam wall insulation? Then use bends in your flex ducts so no light, but air could move though?
 
coreywebster

coreywebster

Well-Known Member
Look up the true wattage on the vipars, I think a 600w is true wattage of about 230w, so you don't have the amount of light you thought you had. So no it wont be too much. With those lights I would want at least 1200 real watts in that space.

As far as splitting your tent, I wouldn't, I havn't tried it but have owned plenty of tents and don't see how splitting one well enough would be an easy job. I have run tents within tents before. That would work better. I still wouldn't recommend it but if you have no other option then that's what I would do. If you do that I recommend a blanket of light proof fabric to cover the veg tent. Since most tens are not 100% light proof.

Run a dehumidifier to reduce RH.

When it comes to flowering I would get more fans.
 
Father Ramirez

Father Ramirez

Well-Known Member
theflowerman.dc said:
...... I am new to this forum, i am a local grower from dc .....
Click to expand...
You are an experienced grower, just new to riu, correct? I will assist in any way I can, but you may be advanced enough to not need much assistance.
I am part of a team of experienced professional broadcasters who for the last nine years have been podcasting. As of this past week the offices have been expanded at the current Glover Park studio. There's a good chance you listen already to one or more of the shows.
We want to hear from DC residents about their experiences growing, using, and buying since Initiative 71 was passed. We're rolling out a dedicated 'cannabis in DC' show in the very near future, format to be conversational, informative, entertaining. Frequent guests prominent in the Industry. Not a droll review of cannabis news, and certainly not stoners talking nonsense.

If you care to chat, please PM me here on riu, or on growdoctordc.com
Forget the rates. For you ... your consultation... your handouts...comped! Seriously, no charge. Just want to help fellow DCers as they help me get my start up running. I'm no expert like so many here, but I know way more than the typical citizen.
 
theflowerman.dc

theflowerman.dc

Active Member
SoOLED said:
All of those would do a 4x4, pretty nice. If you could split the tent(get it light tight) you could Veg/flower in each 4x4. Each 600 is like 200 from the wall and the 900 300, for. Total of 700watts. I guessing but all those lights are kind of the same.

I don't know how to split a tent like that. Duct tape and foam wall insulation? Then use bends in your flex ducts so no light, but air could move though?
Click to expand...
Someone said something about panda paper and tape, would that work?
 
theflowerman.dc

theflowerman.dc

Active Member
coreywebster said:
Look up the true wattage on the vipars, I think a 600w is true wattage of about 230w, so you don't have the amount of light you thought you had. So no it wont be too much. With those lights I would want at least 1200 real watts in that space.

As far as splitting your tent, I wouldn't, I havn't tried it but have owned plenty of tents and don't see how splitting one well enough would be an easy job. I have run tents within tents before. That would work better. I still wouldn't recommend it but if you have no other option then that's what I would do. If you do that I recommend a blanket of light proof fabric to cover the veg tent. Since most tens are not 100% light proof.

Run a dehumidifier to reduce RH.

When it comes to flowering I would get more fans.
Click to expand...

Yea its somewhere around there, well i want to keep these aleast for first round and after that i will be building my own array of cobs,

This is all the room i have so i have to somehow keep my veg and flower ladies in there
 
theflowerman.dc

theflowerman.dc

Active Member
Also to everyone i picked up a 65 pint GE dehumidifier, how long should i keep it on? And around what time of the day? Like when lights are on? Or when they are on?
 
coreywebster

coreywebster

Well-Known Member
theflowerman.dc said:
Someone said something about panda paper and tape, would that work?
Click to expand...
If you have to go down that route of dividing, I always found duct tape can come unstuck when it gets warm. There is some aluminium foil tape you can buy in 50m rolls, its pretty cheap. That sticks rock solid and will never unstick. Plus its aluminium so its really strong and doesn't tare easy and its light proof. So you could in theory use panda film and stick it both sides with small pieces of that overlapping. Obviously you then need two extraction fans and filters.
 
theflowerman.dc

theflowerman.dc

Active Member
coreywebster said:
If you have to go down that route of dividing, I always found duct tape can come unstuck when it gets warm. There is some aluminium foil tape you can buy in 50m rolls, its pretty cheap. That sticks rock solid and will never unstick. Plus its aluminium so its really strong and doesn't tare easy and its light proof. So you could in theory use panda film and stick it both sides with small pieces of that overlapping. Obviously you then need two extraction fans and filters.
Click to expand...
Why would i need two filters? I thought i didnt need a filter in veg?

Or could i get 2x2 and prepare my next rounders in 1 gallon pots and when i transpland i transfer them to 5g pots,

I can put a rack with 2 tier, and prepare my clones in the bottom and move them on top shelf in 1 g gallon pots, which are 6 in round,

I think i could fit 16 pots and i can move those 16 in 7 or 5g pots and move them to my 4x8
 
OrganicGorilla

OrganicGorilla

Well-Known Member
theflowerman.dc said:
Why would i need two filters? I thought i didnt need a filter in veg?

Or could i get 2x2 and prepare my next rounders in 1 gallon pots and when i transpland i transfer them to 5g pots,

I can put a rack with 2 tier, and prepare my clones in the bottom and move them on top shelf in 1 g gallon pots, which are 6 in round,

I think i could fit 16 pots and i can move those 16 in 7 or 5g pots and move them to my 4x8
Click to expand...
Depends how long you veg and what strain you're growing. Many plants stink in veg though.
 
theflowerman.dc

theflowerman.dc

Active Member
GrowGorilla said:
Depends how long you veg and what strain you're growing. Many plants stink in veg though.
Click to expand...

Do you think i could keep them in 1g pots for 1-1.5 month? Till i harvest my flower room?

Or maybe 2 gallon pots if i go with 2x4 instead of 2x2

I still have 2 months to figure out, since im on first week of veg,
 
You must log in or register to reply here.
Top