If the chips are driven at 75-100W each: Start at 16" and drop 2" a day until you're happy.Merry Christmas!
Say... im about to pot some clones and throw them under the cobs.... but i have no idea how high the COBs should be above them or at what intensity.
Some advice would be very useful.
Oh really? My thinking was way off...lolIf the chips are driven at 75-100W each: Start at 16" and drop 2" a day until you're happy.
Anytime, and Merry Christmas to you and yours!Oh really? My thinking was way off...lol
I believe my Tastys are 75w.
Thanks man. And merry christmas!
Merry one to you! About to head off for a second round of too much food, legs are going to be sore from skiing to try and manage the belt line this week!Merry Christmas!
Say... im about to pot some clones and throw them under the cobs.... but i have no idea how high the COBs should be above them or at what intensity.
Some advice would be very useful.
I figured i would start high and work my way down to figure it out. But then... i thought between you and @ttystick... you two probably already done some of that work so... just ask...lolMerry one to you! About to head off for a second round of too much food, legs are going to be sore from skiing to try and manage the belt line this week!
There's probably no wrong height as long as they don't bleach. Personally I try and avoid moving the lights too much so don't really know if small clones/seedlings would get too intense being closer to the lights. My tactic going into a new round is to place the lights where I think the plants will end up stretching to. Then I'll adjust them once at the end of stretch. So I start around 24-28" above then let them stretch into the lights. I'll be targeting to run them 14-16" next round, think I was a bit high this past round at 16-18". Cheers!
Starting high and moving down gives the plants a few days to harden off to the new light and gives you a chance to see how they respond. Keeping them compact is a matter of giving them enough light intensity that they don't go stretching for it, without being so much that they burn.I figured i would start high and work my way down to figure it out. But then... i thought between you and @ttystick... you two probably already done some of that work so... just ask...lol
And given how much this stain will stretch on the flip i need to try and keep them compact as possible before that.
Cheers!
Ya exactly. And i have my routine down for HPS. Just not cobs.Starting high and moving down gives the plants a few days to harden off to the new light and gives you a chance to see how they respond. Keeping them compact is a matter of giving them enough light intensity that they don't go stretching for it, without being so much that they burn.
Yeah different situations call for different ways of doing things. In my case by leaving the lights high and letting them stretch into the lights I get what I need. My plants go in with tight nodes from vegging with blurples. I depend on some stretch to open them up and get light to the bottom. I've noticed with the COBs I'm getting very little popcorn/larf, decent size and tight buds all the way downI figured i would start high and work my way down to figure it out. But then... i thought between you and @ttystick... you two probably already done some of that work so... just ask...lol
And given how much this stain will stretch on the flip i need to try and keep them compact as possible before that.
Cheers!
I found the same with my Romulan. It was a lanky plant with very little in the way of fan leaves (although the fan leaves were COLLOSAL) so even though the plants were almost 5' tall the light got down to the bottoms and made hard nugs. In fact, i didnt chop up a single bud on any of the plants for the hash bin. Not one...they were all solid...Yeah different situations call for different ways of doing things. In my case by leaving the lights high and letting them stretch into the lights I get what I need. My plants go in with tight nodes from vegging with blurples. I depend on some stretch to open them up and get light to the bottom. I've noticed with the COBs I'm getting very little popcorn/larf, decent size and tight buds all the way down
Yeah less popcorn means I'll have to be using more bud for sift/meds, terrible problem to have - lolI found the same with my Romulan. It was a lanky plant with very little in the way of fan leaves (although the fan leaves were COLLOSAL) so even though the plants were almost 5' tall the light got down to the bottoms and made hard nugs. In fact, i didnt chop up a single bud on any of the plants for the hash bin. Not one...they were all solid...
I just dont want to do eight 5 footers in my space again...impossible to move in there..lol
So... do what i can to keep em squat. Next timeni run this strain ill take the time to set up a scrog...
Did you also find that the COBs seem to produce more resin on the spear leaves? Ive never seen so much... the leaves were actually curling on the edges because of it. Never saw anything like it. Maybe that was just my Roms... i dunno...Yeah less popcorn means I'll have to be using more bud for sift/meds, terrible problem to have - lol
I'll have plenty for the hash bin this round, the 2x BPP 3 footers in 1gal at the back of the room have a QP between them will likely go straight to the bin. That strain is strong, the PPP side was quite potent, it just doesn't have much smell or flavour, but will make decent sift for meds.
I get that too, love my crazy frost rails!Did you also find that the COBs seem to produce more resin on the spear leaves? Ive never seen so much... the leaves were actually curling on the edges because of it. Never saw anything like it. Maybe that was just my Roms... i dunno...
Oh yeah for sure, that JTR I pulled was the loudest smell and frostiest run it's had. Pretty sure there's a correlation between the amount of frost and terps coming off them.Did you also find that the COBs seem to produce more resin on the spear leaves? Ive never seen so much... the leaves were actually curling on the edges because of it. Never saw anything like it. Maybe that was just my Roms... i dunno...