Hey everyone I am in a bit of a dilemma.
Long story short have the old time ez-cloner 30 site. In a hot climate Water in rez would be 80+ had it on a 15on 15off timer then tried 1on 5 off then tried 24hr they all sucked and didnt help in cloneing. I cant do root roit i not able to get to my garden everyday to spray and make sure humidity is good. I need a sit and forget type of cloner. And i am going for mass clone production. My opinion so far i been looking into is :
1. DIY w/ http://www.amazon.com/Coleman-25-Quart-Party-Stacker-Cooler/dp/B0030BGA0U/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1412013718&sr=1-1&keywords=coleman+24+can+cooler
2. http://www.health-builders-network.com/?page_id=7
3. Newer ez-cloner, or power cloner, or w/e
Point i am making i need a set and forget cloner then is reliable and since i do live in a hot area that will keep water temp atleast somewhat cold 75-80 not 80+..
additionally information I do own a
http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=14256
Ap 100 was for dwc but i dont dwc no more so can use it for cloning. Also i dont really like ez-cloner because of height. i would like to use this : http://www.homedepot.com/p/HDX-6-Tier-47-7-in-x-77-in-x-18-in-Wire-Industrial-Use-Shelving-Unit-EH-WSHDI-001/204603381?cm_mmc=SEM|G|BT3|PLA&gclid=CjwKEAjwhqShBRDS95LciqqaonISJADj1rgaL_0XkS5uRDS9vBzaCt0uNI92iMYBeY0zAvuPLxjErxoCBU7w_wcB&gclsrc=aw.ds
And be able to do my clone production, not all 6 but at least 4 rows.
Please inform me in what is the best option for me. If im just a idiot please tell me i need to know what i am doing wrong.
Long story short have the old time ez-cloner 30 site. In a hot climate Water in rez would be 80+ had it on a 15on 15off timer then tried 1on 5 off then tried 24hr they all sucked and didnt help in cloneing. I cant do root roit i not able to get to my garden everyday to spray and make sure humidity is good. I need a sit and forget type of cloner. And i am going for mass clone production. My opinion so far i been looking into is :
1. DIY w/ http://www.amazon.com/Coleman-25-Quart-Party-Stacker-Cooler/dp/B0030BGA0U/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1412013718&sr=1-1&keywords=coleman+24+can+cooler
2. http://www.health-builders-network.com/?page_id=7
3. Newer ez-cloner, or power cloner, or w/e
Point i am making i need a set and forget cloner then is reliable and since i do live in a hot area that will keep water temp atleast somewhat cold 75-80 not 80+..
additionally information I do own a
http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=14256
Ap 100 was for dwc but i dont dwc no more so can use it for cloning. Also i dont really like ez-cloner because of height. i would like to use this : http://www.homedepot.com/p/HDX-6-Tier-47-7-in-x-77-in-x-18-in-Wire-Industrial-Use-Shelving-Unit-EH-WSHDI-001/204603381?cm_mmc=SEM|G|BT3|PLA&gclid=CjwKEAjwhqShBRDS95LciqqaonISJADj1rgaL_0XkS5uRDS9vBzaCt0uNI92iMYBeY0zAvuPLxjErxoCBU7w_wcB&gclsrc=aw.ds
And be able to do my clone production, not all 6 but at least 4 rows.
Please inform me in what is the best option for me. If im just a idiot please tell me i need to know what i am doing wrong.